Header Logo

Ribbon Star Extreme, Warm White Outdoor LED Strip Light - UL 24VDC - 118" (3m)

SKU: RL-SC-RSX-WW-10

Product Description

Our commercial grade UL Listed Ribbon Star Extreme is a fully outdoor rated LED Strip Light that can be connected in series up to 100ft (30m). With a heavy duty silicon waterproof coating Ribbon Star Extreme is IP67 outdoor rated, making it waterproof, dust and UV proof (not intended to be submersed for extended periods). Ribbon Star Extreme LED Strip Light provides a perfect light source for any outdoor or indoor lighting projects. The Strip Light can be cut every 6.5 inches and soldered with an end cap and adhesive to provide the best waterproof connection. For those that don't want to solder, there are multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 6.5 inches with a total of 126 LEDs per 3m. At .96W per foot, a 118" (3m) roll would require at least a 12W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 150W 24VDC Constant Voltage power supply. Use with water features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, or any other situation where a durable and dependable waterproof strip light is needed. Comes with 3M VHB double sided tape as well as 10 mounting clips for a permanent mounting solution. Requires a 24VDC Constant Voltage power source. 3000-3500K Color Temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
Extreme Outdoor Connection Guide
LED Strip Light Comparison Guide
Wire to WP Strip Soldering Video
Calculate Electrical Load
Enter Length: ft 
* 0.96 Watts =
0.00 Watts
* Power Supply capacity must be larger than minimum lighting load.
Product Specifications
SPECIFICATIONS
ModelRibbon Star Extreme, Warm White, 118" (3m)
SKURL-SC-RSX-WW-10
Dimensions118"L x 0.48"W x 0.28"H
Connection Type2 Wire (+/-)
LED Chip Type3528
LED Quantity7 SMDs per 6.5 inches
LEDs Per Strip126 SMD LEDs
Input Power24VDC Constant Voltage
Watts0.96W per foot
Beam Angle120°
Lumens64 lm/ft
CRI>80
Kelvin3000-3500K
RatingIP67 Waterproof
Operating Temp-4°~104°F
Max Serial Connection100 Feet
CertificationUL Listed, RoHS, CE
Product Lifetime50,000 Hours
Warranty Period2 Years
Wiring Diagrams
Wire Thumb
Wire Thumb
Wire Thumb

2 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-2C     View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

2 Conductor Outdoor and Waterproof Wire - 18AWG

Silicone End Cap for Single Color Waterproof LED Strips

SKU: RA-SC-RS-EC     View Product Page
This Silicone end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with silicone coating. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip.

Silicone End Cap for Single Color Waterproof LED Strips

Silicone End Cap with hole for Single Color Waterproof LED Strips

SKU: RA-SC-RS-ECH     View Product Page
This Silicone end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.

Silicone End Cap with hole for Single Color Waterproof LED Strips

GE Advanced High Strength Silicone Sealant - 2.8oz Clear

SKU: OA-AM-SIL-GLU     View Product Page
Use the GE Advanced high strength silicone sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights. The GE Advanced silicone will not corrode the copper connections on the circuit board of the strip. It is also 30 minute rain ready, 10 year mold free, UV and freeze resistant, shrink and crack proof.

GE Advanced High Strength Silicone Sealant - 2.8oz Clear

Precision Micro Shears for Silicone Strip Housing and Small Wires

SKU: OA-AM-SIL-CUT     View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").

Precision Micro Shears for Silicone Strip Housing and Small Wires

SILER Aluminum Extrusion for Waterproof Strips - .5" Deep

SKU: EX-KLWP-1     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KLWP-1A-1M

$18.49

Choose Cover Type:
Indoor/Outdoor
$18.49
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KLWP-1A-2M

$43.99

Choose Cover Type:
Indoor/Outdoor
$43.99
Please Call to Order
(Items are Drop Shipped)
775-636-6060

LIPOD Aluminum Extrusion - 1" Wide x 1" Deep

SKU: EX-KL3-3     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-3A-1M

$30.75

Choose Cover Type:
Flat
Shaped
$30.75
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-3A-2M

$75.49

Choose Cover Type:
Flat
Shaped
$75.49
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-3A-3M

$129.99

Choose Cover Type:
Flat
Shaped
$129.99
3M Black Anodized
3M Black Anodized
SKU: EX-KL3-3B-3M

$209.99

Choose Cover Type:
Flat
Shaped
$209.99
3M White Lacquered
3M White Lacquered
SKU: EX-KL3-3W-3M

$207.99

Choose Cover Type:
Flat
Shaped
$207.99

LOKOM Aluminum Extrusion with Wings - 1" Wide x 1" Deep

SKU: EX-KL3-4     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-4A-1M

$30.49

Choose Cover Type:
Flat
Shaped
$30.49
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-4A-2M

$74.99

Choose Cover Type:
Flat
Shaped
$74.99
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-4A-3M

$139.99

Choose Cover Type:
Flat
Shaped
$139.99

LARKO Aluminum Extrusion with Wings - 1" Wide x 1" Deep

SKU: EX-KL3-5     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-5A-1M

$37.75

Choose Cover Type:
Flat
Shaped
$37.75
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-5A-2M

$89.99

Choose Cover Type:
Flat
Shaped
$89.99
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-5A-3M

$156.99

Choose Cover Type:
Flat
Shaped
$156.99

KOZEL Aluminum Extrusion for Drywall Mount - 1" Wide

SKU: EX-KL3-8     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Non-Anodized
1M Silver Non-Anodized
SKU: EX-KL3-8-1M

$41.99

Choose Cover Type:
Flat
Shaped
$41.99
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL3-8-2M

$92.99

Choose Cover Type:
Flat
Shaped
$92.99

KOZUS Aluminum Extrusion for 5/8" Drywall Mount - 1" Wide

SKU: EX-KL3-9     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Non-Anodized
1M Silver Non-Anodized
SKU: EX-KL3-9-1M

$39.99

Choose Cover Type:
Flat
Shaped
$39.99
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL3-9-2M

$97.99

Choose Cover Type:
Flat
Shaped
$97.99

JAZ Aluminum Extrusion with 180° Cover for Hanging Fixtures

SKU: EX-KL3-10     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Anodized with Frosted Cover
1M Silver Anodized with Frosted Cover
SKU: EX-KL3-10A-1M

$48.50

$48.50
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Anodized with Cover
2M Anodized with Cover
SKU: EX-KL3-10A-2M

$119.99

$119.99

JAZ-DUO Aluminum Extrusion with 360° Covers for Hanging Fixtures

SKU: EX-KL3-11     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Anodized with Frosted Covers
1M Silver Anodized with Frosted Covers
SKU: EX-KL3-11A-1M

$54.25

$54.25
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Anodized with Covers
2M Anodized with Covers
SKU: EX-KL3-11A-2M

$132.49

$132.49

Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 15A

SKU: LC-LF-27DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100%. Don't let the small size fool you this controller boasts 15A of maximum output power or 75W at 5VDC, 180W at 12VDC, and 360W at 24VDC. The 16AWG bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 15A

Waterproof Mini Single Color LED Signal Amplifier, 5-24VDC 12A

SKU: LC-LF-23AMP     View Product Page
This small yet powerful waterproof signal amplifier will extend a PWM dimming signal from your 5-24VDC LED dimmer to an additional 12 amps of single color LED lights. A signal amplifier is typically needed for larger LED light installations where you would like to dim a large amount of LED lights off of one dimmer. Once you have met the power limitations of your PWM dimmer you can use this amplifier to dim an additional 12A of 5-24VDC constant voltage LED lights. The max 12A rating allows for 60W of dimming at 5VDC, 144W at 12VDC and 288W at 24VDC. Simple to use bare lead wires make for a painless installation to any new or existing PWM dimming system. This product is IP68 waterproof rated and not meant to be submersed or directly exposed to any outdoor elements.

Waterproof Mini Single Color LED Signal Amplifier, 5-24VDC 12A

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

SKU: LC-LF-23DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100% as well as 8 built in flashing and strobe modes with speed adjustment. Don't let the small size fool you this controller boasts 12A of maximum output power or 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. The bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels or current mode will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

4 Zone LED Bluetooth Sync Dimmer for iOS & Android, 6-24VDC 15A

SKU: LC-LF-SGL-BTS     View Product Page
The newly redesigned IP68 mini Bluetooth Single Color LED Dimmer has the ability to sync numerous dimmers over 4 zone groups using the free 'Light Mesh' app on an ioS or android device. From the smart phone app you can pair to multiple devices, set up groups, save dim levels and scenes. Also inside the app you can choose from 0-100% dimming choices, with quick dimming buttons, as well as 8 pre programmed flash and strobe functions with 99 speed level adjustments. The 1 channel output can control a max load of 15 amps, 180W using 12VDC or 360W using 24VDC. There are 16 storage spaces to save your favorite dim levels and flashing modes. The Bluetooth control range from controller to smartphone or tablet is approximately 45ft with no walls or interference. The small size and simple bare connection wires, as well as sync and group functions make this controller ideal for any new or existing indoor/outdoor LED lighting design. This product is IP68 waterproof rated but not meant to be submersed in water or directly exposed to any outdoor elements.

4 Zone LED Bluetooth Sync Dimmer for iOS & Android, 6-24VDC 15A

4 Zone Time Programmable LED Bluetooth Sync Dimmer for iOS & Android, 6-24VDC 15A

SKU: LC-LF-SGL-BTT     View Product Page
The newly redesigned IP68 mini Bluetooth Single Color LED Dimmer has the ability to sync numerous dimmers over 4 zone groups using the free 'Light Mesh' app on an ioS or android device. From the smart phone app you can pair to multiple devices, set up groups, save dim levels and scenes, as well as trigger scenes using a real time clock with repeating weekday options (BTT model only). Also from the app you can choose from 0-100% dimming choices, with quick dimming buttons, as well as 8 pre programmed flash and strobe functions with 99 speed level adjustments. The 1 channel output can control a max load of 15 amps, 180W using 12VDC or 360W using 24VDC. There are 16 storage spaces to save your favorite dim levels and flashing modes. The Bluetooth control range from controller to smartphone or tablet is approximately 45ft with no walls or interference. The small size and simple bare connection wires, as well as sync and group functions make this controller ideal for any new or existing indoor/outdoor LED lighting design. This product is IP68 waterproof rated but not meant to be submersed in water or directly exposed to any outdoor elements.

4 Zone Time Programmable LED Bluetooth Sync Dimmer for iOS & Android, 6-24VDC 15A

Mini Monochrome LED Sync Dimmer, 5-24VDC 20A

SKU: LC-LT-DIM4-RT-KIT     View Product Page
Our Mini LED Sync Dimmer uses the latest technologies to deliver functional LED dimming control in a small and concealable package. The touch sensitive Monochrome RF Remote offers smooth 5-100% dimming with 50% and 100% quick control buttons. Using state of the art radio frequency control, the user can pair unlimited Mini Remote Controls to a single Mini Receiver. Likewise, each remote can control an unlimited amount of receivers in the given 30ft RF control range. At 5A x 4CH the Mini Receiver can handle a maximum load of 240W at 12VDC or 480W at 24VDC. With it's small size and unique control capabilities this LED Dimmer can be used in any type of LED lighting application.

Mini Monochrome LED Sync Dimmer, 5-24VDC 20A

LED Knob Dimmer One Channel PWM, 12-24VDC 8A

SKU: LC-OL-2DIM     View Product Page
This simple LED Light Dimmer uses a knob to dim your LED lighting products. It requires 12-24VDC input to operate, can handle 1 channel up to 8A or 96W of power at 12VDC, 192W of power at 24VDC. Wires are easily secured with screw down style connections. Can be used to dim LED lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

LED Knob Dimmer One Channel PWM, 12-24VDC 8A

LED Dimmer with IR Sensor, 12-36VDC 8A

SKU: LC-OL-11DIM     View Product Page
This one of a kind PWM Dimmer uses an IR sensor to turn on and off your single channel 12-36VDC constant voltage LED lights at the wave of a hand within an inch or two of the sensor. Hold your hand in front of the IR sensor to dim and brighten your LED lighting. Previous dimming levels are saved once the LED lighting is turned off and will remain at the same brightness once the LED lighting is turned back on. 12-36VDC input and single channel 12-36VDC output with a max of 8A. Each dimmer is capable of dimming 92W at 12VDC, 192W at 24VDC, and 288W at 36VDC. CE and RoHS approved. Click on the link below to view a demonstration video of this product.

LED Dimmer with IR Sensor, 12-36VDC 8A

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 14-16AWG

SKU: OA-AM-HS-16-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 14-16AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 14-16AWG

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

SKU: OA-AM-HS-22-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 18-22AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

Waterproof Wire Jumper Connector, 1-4 Conductor

SKU: OA-GW-CON-1     View Product Page
Our black nylon cable jumper can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your 1-4 conductor LED wiring. Each end has an M20 x 1.5 type connector with a rubber grommet designed to seal any of our 0.2" - 0.35" diameter cables. Inside each jumper is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 16A 450VAC max rating. The design of the clamping rubber grommet creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. This easy to use connector makes combining two pieces of wire quick and effortless for a secure and permanent wire connection.

Waterproof Wire Jumper Connector, 1-4 Conductor
$7.99

Waterproof Wire 2 Port Junction Box, 1-4 Conductor

SKU: OA-GW-CON-2     View Product Page
Our black nylon waterproof 2 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 2 Port Junction Box, 1-4 Conductor
$8.99

Waterproof Wire 3 Port T Connector, 1-4 Conductor

SKU: OA-GW-CON-3     View Product Page
Our black nylon waterproof 3 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 3 Port T Connector, 1-4 Conductor
$9.99

Waterproof Wire 4 Port Connector, 1-4 Conductor

SKU: OA-GW-CON-4     View Product Page
Our black nylon waterproof 4 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 4 Port Connector, 1-4 Conductor
$9.99

2 Conductor Direct Burial Wire - 18AWG

SKU: OA-AX-2C     View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.

2 Conductor Direct Burial Wire - 18AWG

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 60W

SKU: PS-MT-60-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 60W

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

SKU: PS-MT-96A-24     View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire knockouts give this Class 2 transformer a UL Listed rating that complies to UL 8750 standards. The dry and damp specifications allow this to be used indoors or in protected outdoor areas. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

Magnitude LED Power Supply TRIAC Dimmable UL Recognized 24VDC - 96W

SKU: PS-MT-96B-24     View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire leads give this Class 2 transformer a UL Recognized rating that complies to UL 8750 standards. The IP67 weatherproof rating allows for use in wet and salty conditions. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.

Magnitude LED Power Supply TRIAC Dimmable UL Recognized 24VDC - 96W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 150W

SKU: PS-MT-150-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 150W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 150W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 200W

SKU: PS-MT-200-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 200W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 200W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 300W

SKU: PS-MT-300-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 300W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 300W

Mean Well Waterproof LED Power Supply, 60W - 24VDC

SKU: PS-SC-60W-24     View Product Page
A Mean Well brand IP67 Waterproof 60W, 24VDC LED transformer / power supply recommended for use with our 24VDC LED Strip Lights and LED Wall Washers or any other LED Light requiring a 24VDC Constant Voltage power source. 100 - 130VAC input only and a 24VDC, 2.5A output. For wet or damp locations, do not expose to constant liquid, vapor, rain, or sunlight. Has one DC output connection to be used to connect our 24VDC LED products to an AC Power source. CE & RoHS certified; IP67, non-submersible, UL recognized.

Mean Well Waterproof LED Power Supply, 60W - 24VDC

Mean Well Waterproof LED Power Supply 100W - 24VDC

SKU: PS-MW-100-W-24     View Product Page
This product is a 100W Mean Well Brand, 24VDC LED transformer / power supply, 100-240VAC input, with 24VDC output. IP67 rated for wet or damp locations. Has one 10" long 24VDC output connection that can be used to power 24VDC Constant Voltage LED Strip Lights, LED Wall Washers, LED Fixtures, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. Comes with built in short circuit, overload, and over voltage protection. 100-240VAC input wire colors are as follow: Brown - Load, Blue - Neutral. Output wires are Black - DC negative and Red - DC Positive. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 100W - 24VDC

Mean Well Waterproof LED Power Supply 150W - 24VDC

SKU: PS-MW-150-W-24     View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.

Mean Well Waterproof LED Power Supply 150W - 24VDC

Mean Well Waterproof LED Power Supply 240W - 24VDC

SKU: PS-MW-240-W-24     View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.

Mean Well Waterproof LED Power Supply  240W - 24VDC

Mean Well Waterproof LED Power Supply 600W - 24VDC

SKU: PS-MW-600-W-24     View Product Page
This product is a waterproof IP65 rated Mean Well brand 600W, 24VDC LED transformer designed to convert 100-240VAC or 277VAC power to 24VDC. With a 25A maximum output this transformer can drive up to 600 watts of 24VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 12.5 amps of current. Each Mean Well HLG-600H-24A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 600W - 24VDC

Mean Well LED Power Supply, 75W - 24VDC

SKU: PS-MW-75-24     View Product Page
A Mean Well 75W 24VDC LED Power Supply / Transformer, with an AC input of 100-240VAC and 24VDC output through one terminal. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload and over voltage protection gaurds the unit from any improper use. It can be used to connect 24VDC LED Wall Washers, LED Lights, LED Strips, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 70 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply, 75W - 24VDC
Out of Stock

Mean Well LED Power Supply Two Output 100W - 24VDC

SKU: PS-MW-100-24     View Product Page
A 100W Mean Well 24VDC LED transformer / power supply, 100-120VAC or 200-240AC input and 24VDC output through two terminals. Built in short circuit, overload, and over voltage protection make this power supply long lasting and dependable. For dry locations only. Has screw down style connections. It can be used to connect LED Wall Washers, LED Strip Lights, RGB LED lighting and other 24 volt DC products. ULRecognized, RoHs, and CE approved. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Two Output 100W - 24VDC
Out of Stock

Mean Well LED Power Supply Three Output 200W - 24VDC

SKU: PS-MW-200-24     View Product Page
A Mean Well 200W 24VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 24VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 24VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Three Output 200W - 24VDC

Mean Well LED Power Supply CV 320W - 24VDC

SKU: PS-MW-320-24     View Product Page
320W, 24VDC LED Power Supply / Transformer, 100 - 240AC input and 24VDC output through three terminals. For dry locations only. Has screw down style connections. Comes with plastic covering to protect screw down terminals and two cooling fans to prevent high heat during operation. Note: The cooling fan runs noisy and may not be suitable for all applications. It can be used to connect LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 300 watts of 24VDC LED lights. Only install face up or in a manner that the cooling vents face upwards with sufficient breathing space.

Mean Well LED Power Supply CV 320W - 24VDC

Product Reviews

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

- There are currently no reviews for this product

FREE SHIPPING OVER $200
Orders Shipped within Continental United States * Non Oversized Items
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top