Header Logo

Ribbon Star Extreme, White Outdoor LED Strip Light - UL 24VDC - 118" (3m)

SKU: RL-SC-RSX-W-10

Product Description

Our heavy duty and dependable UL Listed Ribbon Star Extreme is an outdoor rated LED Strip Light that can be connected in series up to 100 feet (30m). With a waterproof silicon coating Ribbon Star Extreme is IP67 outdoor rated, making it waterproof, dust and UV proof (not intended to be submersed for extended periods). Ribbon Star Extreme LED Strip Light provides a perfect light source for any outdoor lighting projects. Comes with one waterproof connector, 10 feet of waterproof lead wire can be soldered to the beginning of your strip at an additional cost. The Strip Light can be cut every 6.5 inches and can be soldered and re-waterproofed using wires and end caps with adhesive. 7 SMD LEDs per 6.5 inches with a total of 126 LEDs per 3m. At .96W per foot, a 118" roll would require at least a 12W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 150W 24VDC Constant Voltage power supply. This commercial grade LED strip light is perfect for any outdoor lighting project. Use with water features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, or any other situation that a fully outdoor proof LED Strip Light is needed. Comes with 3M VHB double sided tape and 10 mounting clips for the best long term mounting solution. Requires a 24VDC Constant Voltage power source. 6000-6500K Color Temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
Extreme Outdoor Connection Guide
LED Strip Light Comparison Guide
Wire to WP Strip Soldering Video
Calculate Electrical Load
Enter Length: ft 
* 0.96 Watts =
0.00 Watts
* Power Supply capacity must be larger than minimum lighting load.
Product Specifications
SPECIFICATIONS
ModelRibbon Star Extreme, White, 118" (3m)
SKURL-SC-RSX-W-10
Dimensions118"L x 0.48"W x 0.28"H
Connection Type2 Wire (+/-)
LED Chip Type3528
LED Quantity7 SMDs per 6.5 inches
LEDs Per Strip126 SMD LEDs
Input Power24VDC Constant Voltage
Watts0.96W per foot
Beam Angle120°
Lumens70 lm/ft
CRI>80
Kelvin6000-6500K
RatingIP67 Waterproof
Operating Temp-4°~104°F
Max Serial Connection100 Feet
CertificationUL Listed, RoHS, CE
Product Lifetime50,000 Hours
Warranty Period2 Years
Wiring Diagrams
Wire Thumb
Wire Thumb
Wire Thumb
Reveal - Click the arrow or text to reveal answers.
CSR - Customer service representatives.
Purchaser - Verified purchasers of this product.

Silicone End Cap for Single Color Waterproof LED Strips

SKU: RA-SC-RS-EC     View Product Page
This Silicone end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with silicone coating. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip.

Silicone End Cap for Single Color Waterproof LED Strips

Silicone End Cap with hole for Single Color Waterproof LED Strips

SKU: RA-SC-RS-ECH     View Product Page
This Silicone end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.

Silicone End Cap with hole for Single Color Waterproof LED Strips

GE Advanced High Strength Silicone Sealant - 2.8oz Clear

SKU: OA-AM-SIL-GLU     View Product Page
Use the GE Advanced high strength silicone sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights. The GE Advanced silicone will not corrode the copper connections on the circuit board of the strip. It is also 30 minute rain ready, 10 year mold free, UV and freeze resistant, shrink and crack proof.

GE Advanced High Strength Silicone Sealant - 2.8oz Clear

Precision Micro Shears for Silicone Strip Housing and Small Wires

SKU: OA-AM-SIL-CUT     View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").

Precision Micro Shears for Silicone Strip Housing and Small Wires

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights

SKU: RA-SC-RS-T-CL-10     View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
Out of Stock

SILER Aluminum Extrusion for Waterproof Strips - .5" Deep

SKU: EX-KLWP-1     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KLWP-1A-1M

$18.49

Choose Cover Type:
Indoor/Outdoor
$18.49
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KLWP-1A-2M

$43.99

Choose Cover Type:
Indoor/Outdoor
$43.99
Please Call to Order
(Items are Drop Shipped)
775-636-6060

LIPOD Aluminum Extrusion - 1" Wide x 1" Deep

SKU: EX-KL3-3     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-3A-1M

$30.75

Choose Cover Type:
Flat
Shaped
$30.75
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-3A-2M

$75.49

Choose Cover Type:
Flat
Shaped
$75.49
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-3A-3M

$129.99

Choose Cover Type:
Flat
Shaped
$129.99
3M Black Anodized
3M Black Anodized
SKU: EX-KL3-3B-3M

$209.99

Choose Cover Type:
Flat
Shaped
$209.99
3M White Lacquered
3M White Lacquered
SKU: EX-KL3-3W-3M

$207.99

Choose Cover Type:
Flat
Shaped
$207.99

LOKOM Aluminum Extrusion with Wings - 1" Wide x 1" Deep

SKU: EX-KL3-4     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-4A-1M

$30.49

Choose Cover Type:
Flat
Shaped
$30.49
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-4A-2M

$74.99

Choose Cover Type:
Flat
Shaped
$74.99
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-4A-3M

$139.99

Choose Cover Type:
Flat
Shaped
$139.99

LARKO Aluminum Extrusion with Wings - 1" Wide x 1" Deep

SKU: EX-KL3-5     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths Show 3 Meter Lengths
1M Silver Anodized
1M Silver Anodized
SKU: EX-KL3-5A-1M

$37.75

Choose Cover Type:
Flat
Shaped
$37.75
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths Show 3 Meter Lengths
2M Anodized
2M Anodized
SKU: EX-KL3-5A-2M

$89.99

Choose Cover Type:
Flat
Shaped
$89.99
3 Meter Lengths are drop shipped, have less discount, must ship Express and ship within 3-5 business days.
Show 1 Meter Lengths Show 2 Meter Lengths Showing 3 Meter Lengths
3M Anodized
3M Anodized
SKU: EX-KL3-5A-3M

$156.99

Choose Cover Type:
Flat
Shaped
$156.99

KOZEL Aluminum Extrusion for Drywall Mount - 1" Wide

SKU: EX-KL3-8     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Non-Anodized
1M Silver Non-Anodized
SKU: EX-KL3-8-1M

$41.99

Choose Cover Type:
Flat
Shaped
$41.99
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL3-8-2M

$92.99

Choose Cover Type:
Flat
Shaped
$92.99

KOZUS Aluminum Extrusion for 5/8" Drywall Mount - 1" Wide

SKU: EX-KL3-9     View Product Page

1 Meter Lengths are stocked in our Warehouse, have more discount and ship the same business day.
Showing 1 Meter Lengths Show 2 Meter Lengths
1M Silver Non-Anodized
1M Silver Non-Anodized
SKU: EX-KL3-9-1M

$39.99

Choose Cover Type:
Flat
Shaped
$39.99
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
Show 1 Meter Lengths Showing 2 Meter Lengths
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL3-9-2M

$97.99

Choose Cover Type:
Flat
Shaped
$97.99

2 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-2C     View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

2 Conductor Outdoor and Waterproof Wire - 18AWG

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 14-16AWG

SKU: OA-AM-HS-16-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 14-16AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 14-16AWG

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

SKU: OA-AM-HS-22-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 18-22AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

Waterproof Wire Jumper Connector, 1-4 Conductor

SKU: OA-GW-CON-1     View Product Page
Our black nylon cable jumper can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your 1-4 conductor LED wiring. Each end has an M20 x 1.5 type connector with a rubber grommet designed to seal any of our 0.2" - 0.35" diameter cables. Inside each jumper is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 16A 450VAC max rating. The design of the clamping rubber grommet creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. This easy to use connector makes combining two pieces of wire quick and effortless for a secure and permanent wire connection.

Waterproof Wire Jumper Connector, 1-4 Conductor
$7.99

Waterproof Wire 2 Port Junction Box, 1-4 Conductor

SKU: OA-GW-CON-2     View Product Page
Our black nylon waterproof 2 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 2 Port Junction Box, 1-4 Conductor
$8.99

Waterproof Wire 3 Port T Connector, 1-4 Conductor

SKU: OA-GW-CON-3     View Product Page
Our black nylon waterproof 3 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 3 Port T Connector, 1-4 Conductor
$9.99
Out of Stock

Waterproof Wire 4 Port Connector, 1-4 Conductor

SKU: OA-GW-CON-4     View Product Page
Our black nylon waterproof 4 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 4 Port Connector, 1-4 Conductor
$9.99

Waterproof Wire 8 Port Connector, 2-5 Conductor

SKU: OA-GW-CON-8     View Product Page
Our black nylon waterproof 8 port junction box can be used with our outdoor waterproof 2, 4 and 5 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing glands will work on any 0.25" - 0.35" diameter cables. Use with our 8 port lever wire nuts (sold separately) for quick and easy connections. The design of the clamping rubber interior creates a tight and enclosed seal without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. Each junction box includes 4 rubber plugs in order to use 4-8 of the available wire ports.

Waterproof Wire 8 Port Connector, 2-5 Conductor
$15.99

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

SKU: LC-LF-23DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100% as well as 8 built in flashing and strobe modes with speed adjustment. Don't let the small size fool you this controller boasts 12A of maximum output power or 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. The bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels or current mode will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 15A

SKU: LC-LF-27DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100%. Don't let the small size fool you this controller boasts 15A of maximum output power or 75W at 5VDC, 180W at 12VDC, and 360W at 24VDC. The 16AWG bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 15A

PWM LED Knob Dimmer, 12-24VDC 30A

SKU: LC-LF-2DIM     View Product Page
This small and simple LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100%. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

PWM LED Knob Dimmer, 12-24VDC 30A

LED Proximity On/Off Switch with IR Sensor, 12-24VDC 2.5A

SKU: LC-LF-2-SENS     View Product Page
Our mini IR Proximity Switch is a small and effective low voltage on/off switch for 12-24VDC constant voltage LED lighting products. With a 2.5 amp output this switch can control up to 30 watts of 12VDC lighting or 60 watts of 24VDC lighting using bare wire connections. This controller is designed to be powered off when there is any object within 1" of the sensor and powered on when unobstructed. The sensor is conveniently attached to a threaded bolt designed to be permanently installed in any 0.47"-0.50" diameter hole using a 15mm size nut. Designed to be used in a dry environment, ideal applications include cabinet doors, drawers, safes, closets, tool boxes, storage, boats, RV's or any other application requiring illumination when opened or moved. For larger installations use with a single channel signal amplifier to increase the load output.

LED Proximity On/Off Switch with IR Sensor, 12-24VDC 2.5A

LED Dimmer with Key Fob RF Remote, 12-24V 30A

SKU: LC-LF-1DIM     View Product Page
Our small sized LED dimmer uses a uniquely paired key fob RF remote to dim and control your 12-24VDC constant voltage LED lights. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. Choose from 5-100% range of dimming levels using two simple arrow buttons on the remote. Our key fob led dimmer can be used to dim LED strip lights, LED modules, LED wall washers, or for dimming any one color common anode 12VDC or 24VDC LED products. Each RF Remote requires (2) 3V / CR2016 type batteries (included) and is paired with a unique RF frequency to prevent command crossover when using multiple units.

LED Dimmer with Key Fob RF Remote, 12-24V 30A

LED On/Off Switch with PIR Motion Sensor, 12-24VDC 2.5A

SKU: LC-LF-1-SENS     View Product Page
Our mini PIR motion sensing switch is a small and effective low voltage on/off switch for 12-24VDC constant voltage LED lighting products. The sensor detects motion within a 10ft radius which then switches your lights on for 30 seconds or until no more motion is detected. With a 2.5 amp output this switch can control up to 30 watts of 12VDC lighting or 60 watts of 24VDC lighting using bare wire connections. The sensor is conveniently attached to a threaded bolt designed to be permanently installed in any 0.47"-0.50" diameter hole using a 15mm size nut. This product is only intended to be used in a dry environment, ideal applications include dark areas where a light switch is inconvenient such as laundry rooms, bathrooms, attics, basements, hallways, garages, sheds, and storage areas. For larger installations use with a single channel signal amplifier to increase the load output.

LED On/Off Switch with PIR Motion Sensor, 12-24VDC 2.5A

Mini LED Dimmer With RF Remote, 5-24VDC 5A

SKU: LC-LF-19DIM     View Product Page
This small yet powerful mini LED Dimmer with RF Remote is a great 5-24VDC LED Dimmer that provides smooth LED dimming from 5-100% brightness. The simple bare wire leads make connecting your dimmer simple for any type of 5-24VDC Constant Voltage installation. Use with our barrel type connectors for simple connections and splitter options. The RF remote has 8 pre-set dimming levels for quick and easy dimming or you can use the brightness buttons to dim your lights 64 levels from 5-100% brightness. This LED Dimmer can dim no more than 5A or 60W of lights at 12VDC, 120W of lights at 24VDC, perfect for smaller lighting applications. Use with a single channel signal amplifier to dim a larger load of lighting. Each RF remote includes one 3V CR2025 battery for operation and is specially paired to its receiver.

Mini LED Dimmer With RF Remote, 5-24VDC 5A
Out of Stock

Wall Mount 4 Zone Wireless Single Color LED Dimmer with DMX Output

SKU: LC-LT-SDIM-UX5     View Product Page
The UX5 wall mount LED Dimming system uses state of the art technology to create a complete dimming package that allows you to control 4 zones of low voltage single color LED lighting in a variety of ways. With the addition of the V5 remote you can control from the wall pad or using a hand held remote. Furthermore you can pair the UX5 to a WiFi-104 controller to control from a smartphone app, wall unit, or hand held remote. This is an ideal product for high end lighting projects that desire control from a variety of sources. In its simplest form you can pair an unlimited amount of RF receivers over 4 zones, or use a wired setup using single channel DMX decoders and the DMX output on the UX5 unit. Each wireless receiver can control 5 amps of lighting over 4 channels. This means that you can control 4 strings of 12V 60W LEDs or 4 strings of 24V 120W LEDs from each receiver. This product is indoor rated, RoHS and CE approved.

Wall Mount 4 Zone Wireless Single Color LED Dimmer with DMX Output
UX5 Controller
$99.99
Wireless Receiver
$64.99

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 60W

SKU: PS-MT-60-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 60W

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

SKU: PS-MT-96A-24     View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire knockouts give this Class 2 transformer a UL Listed rating that complies to UL 8750 standards. The dry and damp specifications allow this to be used indoors or in protected outdoor areas. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

Magnitude LED Power Supply TRIAC Dimmable UL Recognized 24VDC - 96W

SKU: PS-MT-96B-24     View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire leads give this Class 2 transformer a UL Recognized rating that complies to UL 8750 standards. The IP67 weatherproof rating allows for use in wet and salty conditions. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.

Magnitude LED Power Supply TRIAC Dimmable UL Recognized 24VDC - 96W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 150W

SKU: PS-MT-150-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 150W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 150W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 200W

SKU: PS-MT-200-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 200W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 200W

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 300W

SKU: PS-MT-300-24     View Product Page
If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 300W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 24V - 300W

Mean Well Waterproof LED Power Supply, 60W - 24VDC

SKU: PS-SC-60W-24     View Product Page
A Mean Well brand IP67 Waterproof 60W, 24VDC LED transformer / power supply recommended for use with our 24VDC LED Strip Lights and LED Wall Washers or any other LED Light requiring a 24VDC Constant Voltage power source. 100 - 130VAC input only and a 24VDC, 2.5A output. For wet or damp locations, do not expose to constant liquid, vapor, rain, or sunlight. Has one DC output connection to be used to connect our 24VDC LED products to an AC Power source. CE & RoHS certified; IP67, non-submersible, UL recognized.

Mean Well Waterproof LED Power Supply, 60W - 24VDC

Mean Well Plug-in LED Power Supply 60W - 24VDC

SKU: PS-MW-60-24     View Product Page
A high quality Mean Well brand three prong Wall plug, 60 watt Constant Voltage LED Power Supply which is suitable for dry locations and is capable of supplying power to 54 - 1 watt led modules or lights. Use with any 100-240VAC input for a quick and easy installation of your 24VDC LED Strip Lights, LED Modules, and LED Lights. Comes with short circuit, overload, over voltage and over temperature shut off protection. It has a 5.5mm X 2.1mm Female Plug for the 24V connection. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. One 5.5 X 2.1mm Male Barrel Jack with screw down terminals included. UL, RoHs and CE approved.

Mean Well Plug-in LED Power Supply 60W - 24VDC
Out of Stock

Mean Well LED Power Supply, 75W - 24VDC

SKU: PS-MW-75-24     View Product Page
A Mean Well 75W 24VDC LED Power Supply / Transformer, with an AC input of 100-240VAC and 24VDC output through one terminal. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload and over voltage protection gaurds the unit from any improper use. It can be used to connect 24VDC LED Wall Washers, LED Lights, LED Strips, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 70 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply, 75W - 24VDC

Mean Well Waterproof LED Power Supply 150W - 24VDC

SKU: PS-MW-150-W-24     View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.

Mean Well Waterproof LED Power Supply 150W - 24VDC

Mean Well LED Power Supply Three Output 200W - 24VDC

SKU: PS-MW-200-24     View Product Page
A Mean Well 200W 24VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 24VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 24VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Three Output 200W - 24VDC

Mean Well Waterproof LED Power Supply 240W - 24VDC

SKU: PS-MW-240-W-24     View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.

Mean Well Waterproof LED Power Supply  240W - 24VDC

Mean Well LED Power Supply CV 320W - 24VDC

SKU: PS-MW-320-24     View Product Page
320W, 24VDC LED Power Supply / Transformer, 100 - 240AC input and 24VDC output through three terminals. For dry locations only. Has screw down style connections. Comes with plastic covering to protect screw down terminals and two cooling fans to prevent high heat during operation. Note: The cooling fan runs noisy and may not be suitable for all applications. It can be used to connect LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 300 watts of 24VDC LED lights. Only install face up or in a manner that the cooling vents face upwards with sufficient breathing space.

Mean Well LED Power Supply CV 320W - 24VDC

Mean Well Waterproof LED Power Supply 600W - 24VDC

SKU: PS-MW-600-W-24     View Product Page
This product is a waterproof IP65 rated Mean Well brand 600W, 24VDC LED transformer designed to convert 100-240VAC or 277VAC power to 24VDC. With a 25A maximum output this transformer can drive up to 600 watts of 24VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 12.5 amps of current. Each Mean Well HLG-600H-24A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 600W - 24VDC

Mean Well LED Power Supply CV 600W - 24VDC

SKU: PS-MW-600-24     View Product Page
This Mean Well 600W, 24VDC LED Power Supply / Transformer, has a 100 - 240AC input and 24VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 24VDC LED lights. Only install face up with sufficient breathing space.

Mean Well LED Power Supply CV 600W - 24VDC

Product Reviews

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

- There are currently no reviews for this product

FREE SHIPPING OVER $200
Orders Shipped within Continental United States * Non Oversized Items
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top