If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 300W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
|Model||Magnitude LED Power Supply MLV Dimmable|
|Dimensions||4.20"L x 3.50"W x 9.81"H|
|AC Input Voltage||120VAC|
|DC Output||24VDC - 12.5A|
|Output Watts Max||24VDC - 300W|
|Warranty Period||2 Years|
Ribbon Star MegaLux, High Density White LED Strip Light - ETL 24VDC
SKU: RL-DX-MGL-W2-10 View Product Page
Our Ribbon Star MegaLux High Density White LED Strip Light is an extremely bright 24VDC LED Strip Light, outputting an incredibly bright 1,902 lumens per foot. This ETL Listed 118" (3m) LED ribbon can be cut every 1.31" and must be soldered to re-connect and should be mounted to a metal heat sink. Comes with a heavy duty double sided mounting tape on the back, for the best long-term mounting solution. Each strip consists of 8 high output 2835 SMD LEDs per 1.31" for a total of 720 SMD LEDs per 118" LED strip. This light requires at least 14.63 watts of 24VDC power per foot (0.61A/ft). This LED Ribbon strip is so bright it can be used for task, and general lighting in homes, businesses, interior lighting, light boxes, and signs. It can also be used for overhead lighting, cove, under cabinet, back lighting and many more applications. We recommended that you mount this strip to steel or aluminum for a good heat sink. 5700-6500K Color Temperature, ETL Listed, RoHS and CE approved.
Bright Star 40" x 2" White LED Wall Washer - 45W, 24VDC
SKU: WW-SC-WALL-40 View Product Page
This White LED Wall Washer is a 40" x 2" linear type light with 45W 24VDC rated power use. It has 36 white - 1.25 watt Epistar LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This light fixture can project light up to 100 feet. This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be dimmed by any 24VDC Constant Voltage PWM Dimmer. We recommend no more than three 45 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. For easy connection of wall washers, power supplies and dimmers, use the many waterproof connectors wire options. 5500-7000K Cool White color temperature, non-submersible, CE and RoHS approved.
Note: * Indicates a required field
- There are currently no reviews for this product