If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
|Model||Magnitude LED Power Supply MLV Dimmable|
|Dimensions||2.59"L x 2.20"W x 6.06"H|
|AC Input Voltage||120VAC|
|DC Output||24VDC - 2.4A|
|Output Watts Max||24VDC - 60W|
|Warranty Period||2 Years|
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Bright Star 40" x 2" Warm White LED Wall Washer - 45W, 24VDC
SKU: WW-SC-WALL-40-WW View Product Page
This Warm White LED Wall Washer is a 40" X 2" linear type light with 45W 24VDC rated power use. It has 36 white - 1.25 watt LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This light fixture can project light up to 45 feet. This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be dimmed by any 24VDC Constant Voltage PWM Dimmer. We recommend no more than three 45 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. For easy connection of wall washers, power supplies and dimmers, use the many waterproof connectors wire options. Non-submersible, RoHS and CE approved, 2700-3200K Warm White Color temperature.