1.50" White LED Recessed Light Clip Mount - 12VDC, IP67 Frosted Face

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

SKU: OA-AM-HS-22-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 18-22AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

2 Conductor Direct Burial Wire - 18AWG

SKU: OA-AX-2C     View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.

2 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-2C     View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

4 Zone LED Bluetooth Sync Dimmer for iOS & Android, 6-24VDC 15A

SKU: LC-RR-SGL-BTS     View Product Page
The newly redesigned IP68 mini Bluetooth Single Color LED Dimmer has the ability to sync numerous dimmers over 4 zone groups using the free 'Light Mesh' app on an ioS or android device. From the smart phone app you can pair to multiple devices, set up groups, save dim levels and scenes. Also inside the app you can choose from 0-100% dimming choices, with quick dimming buttons, as well as 8 pre programmed flash and strobe functions with 99 speed level adjustments. The 1 channel output can control a max load of 15 amps, 180W using 12VDC or 360W using 24VDC. There are 16 storage spaces to save your favorite dim levels and flashing modes. The Bluetooth control range from controller to smartphone or tablet is approximately 45ft with no walls or interference. The small size and simple bare connection wires, as well as sync and group functions make this controller ideal for any new or existing indoor/outdoor LED lighting design. This product is IP68 waterproof rated but not meant to be submersed in water or directly exposed to any outdoor elements.