SKU: PS-MT-150-12
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 150w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.
| SPECIFICATIONS | |
| Model | Magnitude LED Power Supply MLV Dimmable |
| SKU | PS-MT-150-12 |
| Dimensions | 3.06"L x 2.94"W x 9.17"H |
| AC Input Voltage | 120VAC |
| DC Output | 12VDC - 12.35A |
| Output Watts Max | 12VDC - 150W |
| Rating | Dry/Damp |
| Warranty Period | 2 Years |
Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 150W
Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 150W
Ribbon Star Ultra 2 White Strip Light Silicone WP CRI 90 2110 chip UL 12VDC - IP65
SKU: RL-SC-UT12-W-T-3M View Product Page
Our high quality CRI 90+ UL Listed Ribbon Star Ultra, White flexible waterproof LED Strip Light is enclosed in a heavy duty silicon coating for an IP65 rating, making this LED Strip water-resistant (non-submersible), dust and UV proof. Each 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 4 SMD LEDs per 0.4" and 49 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 5750-6250K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Ribbon Star Ultra 2 Warm White Strip Light Silicone WP CRI 90 2110 chip UL 12VDC - IP65
SKU: RL-SC-UT12-WW-T-3M View Product Page
Our high quality CRI 90+ UL Listed Ribbon Star Ultra, Warm White flexible waterproof LED Strip Light is enclosed in a heavy duty silicon coating for an IP65 rating, making this LED Strip water-resistant (non-submersible), dust and UV proof. Each 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 4 SMD LEDs per 0.4" and 49 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 2600-3100K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
