Ribbon to Ribbon Solder Connector for Ribbon Star Extreme RGB

5 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-5C     View Product Page
This is a 5 conductor 18AWG encased outdoor and waterproof wire, made for use with our RGB Extreme Strip Light and RGB + White Strip lights. This wire can also be used for any other indoor or outdoor low voltage LED lighting projects. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an Control signal to as many fixtures as your junction box will allow. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

Ribbon Star Extreme, RGB Indoor LED Strip Light - UL 24VDC

SKU: RL-SC-RSX2-RGB-10     View Product Page
Our 24VDC UL Listed Ribbon Star Extreme RGB LED Strip Light is the only of its kind that can be connected in series up to 30m (100ft). Using 2 positive wires (V+) and 3 negative wires (RGB) this strip can achieve longer serial connections than a standard RGB strip light. Be sure to share your positive wires to your RGB control source for the entire strip to work in unison. Forget all the extra wiring and components for your large scale color changing LED lighting projects. Ribbon Star Extreme RGB LED Strip Lights provide a perfect light source for any indoor accent, cove, stair, hallway, or pathway lighting. The Strip Light can be cut every 9.5 inches and must be soldered to re-connect. 7 SMD LEDs per 9.5 inches with a total of 84 LEDs per 3m. At 1.7W per foot, a 3m roll would require at least a 17W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 170W 24VDC Constant Voltage power supply. Comes with 3M VHB mounting tape and ten mounting clips for a permanent mounting solution. This RGB LED Strip Light requires a 24VDC Constant Voltage power source. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.