SKU: LA-EL-DMX-CBL7
This DMX signal cord comes with a XLR5 female plug on one end and XLR5 male jack on the other with 36" of shielded or non-shielded cable in between. This cable will allow you to connect a DMX controller or device that has XLR5 input/output plugs like our flicker free DMX Drivers, or to daisy chain with other XLR5 DMX fixtures and controllers.
Flicker Free 1 to 5 Channel Adjustable LED DMX RDM Decoder, 12-24VDC 8A/CH
SKU: LC-SR-DMX5-FF View Product Page
Our UL Recognized flicker free 1 to 5 channel DMX LED decoder is the top choice for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (5 single channels) or 5CH output (RGBW+WW) and set your starting DMX address. XLR5, RJ45 or simple screw down connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 8 amps per channel allows you to control up to 96W (12VDC) or 192W (24VDC) per 5 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized RoHS and CE approved.
Flicker Free 1 to 12 Channel Adjustable LED DMX RDM Decoder, 12-24VDC 5A/CH
SKU: LC-SR-DMX12-FF View Product Page
Our UL Recognized adjustable flicker free 12 channel DMX LED decoder has three RGBW outputs to enable smooth control of three 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (12 single channels) or 12CH output (4 RGBW channels) and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 5 amps per channel allows you to control up to 720W (12VDC) or 1,440W (24VDC) per 12 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS, and CE approved.
Flicker Free 1 to 24 Channel Adjustable LED DMX RDM Decoder, UL 12-24VDC 4A/CH
SKU: LC-SR-DMX24-FF View Product Page
Our UL Recognized flicker free 24 channel adjustable DMX/RDM LED decoder has six RGBW outputs to enable smooth control of six 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal DMX decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH (24 single channels) or 24CH (6 RGBW channels) output and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 4 amps per channel allows you to control up to 1,152W (12VDC) or 2,304W (24VDC) per 24 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product