SKU: PS-MW-600-24
This Mean Well 600W, 24VDC LED Power Supply / Transformer, has a 100 - 240AC input and 24VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 24VDC LED lights. Only install face up with sufficient breathing space.
SPECIFICATIONS | |
Model | 600W, 24VDC LED Power Supply |
SKU | PS-MW-600-24 |
Dimensions | 10.5"L x 5.0"W x 2.5"H |
AC Input Voltage | 100 - 240VAC |
DC Output | 24VDC / 25A |
Output Watts Max | 600 Watts |
Rating | Dry |
Warranty Period | 1 Year |
(4) Mean Well Power Supply Mounting Bracket for 600W PS
SKU: PS-MW-MNT3-4 View Product Page
This product is a pack of 4 mounting brackets (MHS013) with 8 screws to mount our Mean Well brand SE 600W power supplies. Use these 4 mounts to secure any of the 12VDC or 24VDC versions of the power supplies mentioned above. If mounting to a vertical surface such as a wall, be sure that the cooling vents are pointed upwards to allow heat to escape the unit. Use these clips to secure our 12VDC or 24VDC 600W indoor transformers to any drillable surface. Sold in sets of 4, 8 mounting screws included.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
10m Reel - 32.8ft Long Run LED Strip Light, CRI > 90, 140 LEDs/m - ETL 24VDC
SKU: RL-DX-LR140 View Product Page
The LR140, 10m strip light roll is the brightest and highest output of our Ribbon Star Long Run series tape lights. With 140 LEDs per meter (42 per foot) and a constant current driving IC design, this entire 32.8ft strip can be powered from one end with consistent voltage and brightness from beginning to end. The top mounted 2835 LED chips generate less heat than older 3528 style while outputting high lumens with a longer lifespan. The CRI over 90 spec renders pure illumination of the lighting spectrum, making colors and displays more vibrant and true. A low power output of only 3.66 watts per foot and high lumen output up to 480 lumens per foot make this strip extremely efficient up to 131 lumens per watt. This light strip requires 24VDC power input, can be dimmed using low voltage PWM dimmer or dimmable power supply and can be cut and re-connected every 1.97" (5cm). See our 8mm connector options sold separately below as well as soldering guides for a more permanent connection.
Note: * Indicates a required field
- There are currently no reviews for this product