SKU: LA-AM-BC-PM
This male 5.5 X 2.1 barrel jack connector is especially designed to create custom power jacks on any surface 1/8" thick. To attach simply drill a 5/16" hole into any firm surface 1/8" thick or less, then screw the nut into place and solder on your connection wires. The short pin is for positive wires and the longer pin is used for negative wires and will pair with any 5.5 X 2.1mm barrel plug.
5.5 x 2.1mm Barrel Jack to Plug Jumper Cable
SKU: LA-LU-BJ-1 View Product Page
Our 5.5 x 2.1mm barrel jack to barrel plug extension cable has total length of 59" using 22AWG wire. It can be used for many projects to connect, extend and create a quick disconnect from LED lights to a power source using 5.5 x 2.1mm barrel connectors. Please note this adapter is only rated for a maximum of 5A.
(3) 5.5 x 2.1mm Barrel Plugs with 12" Lead Wire
SKU: LA-SC-WJ-F-3 View Product Page
These 5.5 x 2.1mm barrel plugs have 12" - 22AWG lead wire attached. Each connector can be used for many projects to mate with a 5.5 x 2.1mm barrel jack connector. Sold in sets of 3. Please note this adapter is only rated for a maximum of 5A
(3) 5.5 x 2.1mm Barrel Jacks to 8mm Strip Light Connectors
SKU: RA-SC-RS-RJ-3 View Product Page
Use these Jack connectors on our 8mm wide Ribbon Star and Ribbon Star Max LED Strips to connect to a power supply that has a 5.5mm X 2.1mm. 12" of lead wire. Sold in sets of 3. For use with 0.31" (8mm) wide ribbon products only, not to exceed 5A.
(3) 5.5 x 2.1mm Barrel Jacks to 10mm Strip Light Connectors
SKU: RA-SC-RSU-RJ-3 View Product Page
Use these Jack connectors with our 10mm wide Ribbon Star Long Run 60 LED/m or Dim to Warm Strip Lights to connect to a power supply or controller that has a 5.5mm x 2.1mm Plug connector. 12" of lead wire. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only. Maximum power load should not exceed 5A.
Note: * Indicates a required field
- There are currently no reviews for this product