Each 5 meter roll of well-built mini neon LED strip light has a rugged IP67 waterproof rated UV resistant PVC housing to create vibrant dot free illumination for a line of light effect. The milky coating and design of this special strip light delivers 100% light diffusion with no hot spots, similar to the look of a neon tube. This strip is designed to bend on a vertical axis and can be used to wrap perimeters, down light, up light or any application requiring the strip to be bent how it is rolled up on the reel. Use our mini neon led indoors and outdoors for a variety of lighting projects both functional and decorative. This strip requires 24 volt DC input and consumes 3.81 watts of power per foot, at full brightness. This product is dimmable by our PWM low voltage dimmers or by our magnitude dimmable power supplies with compatible wall switch. This strip can be cut and re-connected every 1.5" and comes with 1 extra wire lead setup, 1 end cap, and 20 plastic mounting clips.
|Click For Product Data Sheet
|Click For Installation Guide
|LED Strip Light Comparison Guide
|Calculate Electrical Load
|* Power Supply capacity must be larger than minimum lighting load.
|Mini Neon Top Emitting, Waterproof Warm White
|197" x 0.52" x 0.40"H
|2 Wire (+/-)
|LED Chip Type
|7 SMDs per 1.5 inches
|LEDs Per Strip
|910 SMD LEDs
|24VDC Constant Voltage
|3.81W per foot
|Max Serial Connection
|16.4 Feet (5m)
|ETL, RoHS, CE
For B2B or Large Quantity Price Info Click Here
Solderless Connector Assembly for Top Emmiting Mini Neon
SKU: LN-SC-NEOT-CON View Product Page
Use these 12" long solderless connectors for our top emitting mini neon strip lights if you do not want to make a connection by solder. After cutting the neon strip on the designated cut line these connectors easily slide into place to make contact on the conductive pads. Each connector includes one 12" side emitting strip light cable connector (18AWG), 1 waterproof silicon tape pad, internal install clip, external install clip, screws for end cap. The connector screws into place and requires a Phillips head screw driver for installation.
End Cap for Mini Neon Top Emmiting LED Strip Light
SKU: LN-SC-NEOT-CAP View Product Page
This end cap is designed to be used only with our top emitting mini neon strip lights, SKU: LN-SC-NEOT-W-5 or LN-SC-NEOT-WW-5. After cutting your strip light use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water, dust, and moisture.
(10) Mounting Clips for Mini Neon Top Emmiting LED Strip Lights
SKU: LN-SC-NEOT-CLIPS-10 View Product Page
This is a pack of 10 mounting clips for our mini neon top emitting strip lights. Each clip has a screw hole with counter sink for mounting to walls, ceilings, stone or concrete. The side emitting strip bends on a vertical access so mounting tape will work but the clips offer a more versatile way to mount the strips. Sold in packs of 10, for installation on curved designs with a bend diameter no more than 5.91" to avoid damage to the strip light.
Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W
SKU: PS-MT-96A-24 View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire knockouts give this Class 2 transformer a UL Listed rating that complies to UL 8750 standards. The dry and damp specifications allow this to be used indoors or in protected outdoor areas. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.
2 Conductor Direct Burial Wire - 18AWG
SKU: OA-AX-2C View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Note: * Indicates a required field
Mounting clips are beyond useless
The quality of the light unit seems good but the clips are on another level of garbage. I could line all 10 clips beside each other and they wouldn't hold a foot of this. Zero tension hold whatsoever. Was going to buy a lot more, but without upgraded clips I don't recommend
Nov 23, 2019 | Lyndon
Dealt with issue very quickly
Ecocityled dealt with clamp issue very quickly. Fantastic new product, makes this a great product. As an electrician by trade I am always looking fir great innovative products. Many of Us at our company would love to use this product in the future. Thank you for dealing with my issues
Dec 3, 2019 | Lyndon