If you have you been looking for a way to dim your 24VDC LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 24VDC up to 200W. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
|Model||Magnitude LED Power Supply MLV Dimmable|
|Dimensions||3.06"L x 2.94"W x 9.17"H|
|AC Input Voltage||120VAC|
|DC Output||24VDC - 8.33A|
|Output Watts Max||24VDC - 200W|
|Warranty Period||2 Years|
Bright Star 6" Round White LED Wall Washer Silver Finish - 12W, 24VDC
SKU: WW-SC-W-6S View Product Page
This is a great new compact White LED Wall Washer with six 2W LED chips and a smooth silver finish. A 12W max output at 24VDC allows this wall washer to produce clean and bright white lighting on walls, buildings, ceiling and signs up to 65ft. This wall washer is able to dim up to 255 levels with proper control. A 23° beam angle makes for a more condensed light output for pillars, landscaping, and architecture. This light is encased in an IP65 stainless steel housing making it fully dust protected and protected against minimal low pressure water exposure. Tempered glass and stainless fasteners give this light long lasting outdoor use and the hinges allow for light adjustment. The light can be controlled by a PWM Dimmer or DMX controller using a common anode connection. We recommend no more than six 12 watt wall washers connected in a series. An attached 70" water-resistant connector cord is included with every light. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.