Create dot free color changing illumination without the addition of a plastic cover or diffuser using our top emitting RGB neon strip light. A special milky silicon coating is extruded around a high density 24VDC RGB strip light to create brilliant line of light 180° color output without any visible dots or hot spots. Constructed with a double-hollow air layer for good heat dissipation this strip is ideal for accent lighting around rooms, signs, displays and so much more. Six 5050 LEDs per every 1.97" cuttable section this strip outputs an impressive 213 lumens per foot when all colors are on full brightness. Create millions of color varieties with the right 24VDC color controller. Keep in mind that this strip is top emitting and will only bend on a vertical axis. Once the strip is cut it must be soldered to re-connect and then sealed using an outdoor rated silicon adhesive. Double sided tape will not stick to the silicon material of this strip. Each 5 meter roll comes with 15 mounting clips, 15 self-tapping screws, 1 wire lead setup, and one end cap. Requiring 7.3 watts of 24VDC power for each foot, the entire roll of 16.4ft would need 120 watts minimum of 24VDC power to light on full brightness. This product is ETL listed, RoHS and CE approved.
|Click For Product Data Sheet|
|RGB Neon Soldering Tutorial|
|LED Strip Light Comparison Guide|
|Click For Electrical Load Calculator|
|Model||Waterproof Neon RGB LED Strip Light, Top Emitting - ETL 24VDC - 197" (5m)|
|Dimensions||197" x 0.59" x 0.47"H|
|Connection Type||4 Wire RGB(+)|
|LED Chip Type||5050|
|LED Quantity||6 SMDs per 1.97 inches|
|LEDs Per Strip||600 RGB 3 in 1 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||7.3W per foot|
|Max Serial Connection||20 Feet|
|Certification||ETL Listed, RoHS, CE|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
Waterproof Mini RGB LED Controller with RF Remote, 5-24VDC 4A/CH
SKU: LC-LF-8RGB View Product Page
This Mini Waterproof 5-24VDC RGB LED Controller is loaded with functionality and has an RF remote range of up to 50ft. It can be used to control color effects for common anode style 5-24VDC constant voltage RGB LED Lights. With 4A per channel output this controller can handle 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. Functions include 30 static colors with 5 levels of dim (minimum dim level %30), and 43 varieties of color flashing, strobing, and fading modes with 10 levels of speed adjustment. Each remote can be paired with a controller by pressing the power button and pause together within 5 seconds of DC power to the controller input. Power input is connected by 16AWG bare lead wires, and and signal output is connected by 18AWG bare wire leads. For quick and easy wire connections use some of our wire snap connectors found below. The mini controller (not remote) is IP68 waterproof rated but not designed to be submersed in water or directly exposed to outdoor elements.
Mean Well Waterproof LED Power Supply 150W - 24VDC
SKU: PS-MW-150-W-24 View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.
4 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-4C View Product Page
This is a 4 conductor 18AWG encased outdoor and waterproof wire, made for use with our stainless steel IP68 junction boxes or any other indoor or outdoor LED lighting project. Use this wire with our underwater and outdoor RGB LED fixtures, Strip Lights, Modules, or any other low voltage DC system. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an RGB Control signal to as many fixtures as your junction box will allow. This wire is also a great option for any indoor or outdoor RGB LED projects requiring a 4 conductor encased wire. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.