SKU: MD-EL-SN1-DW
The Super Nova 1 Daylight White LED Modules are the premier lighting product for channel letters, signs and many other back lighting projects. On board are high quality Phillips LumiLEDs with a special lens to direct the beam to 145° allowing for a more light in smaller spaces which will save you time and money in installation costs. Operating at 12VDC each Super Nova 1 Chip LED Module consumes 1.4W of power and outputs 88lm per module. The single surface mount 3030 Phillips LED Chips have a 42,500 hour lifetime span and the ABS housing gives this module an IP65 water-resistant rating. 30 Modules maximum can be connected in one serial length, for larger jobs you must wire multiple 30 module units in parallel to the 12VDC power source. These modules have a 1 year warranty, are UL Recognized, CE and RoHS approved.
| Click For Product Data Sheet |
| Click For Installation Guide |
| Calculate Electrical Load | |
| * Power Supply capacity must be larger than minimum lighting load. | |
| SPECIFICATIONS | |
| Model | Super Nova 1 LED Module - Daylight White |
| SKU | MD-EL-SN1-DW |
| Dimensions | 1.77" x 1.14" x 0.33"H |
| Connection Type | 2 Wire (+/-) 18AWG |
| LEDs Chip Size | 3030 |
| LEDs Quantity | 1 LED per Module |
| Module Spacing | 7.9" Center to Center |
| Modules Per Foot | 1.52 Modules |
| Input Power | 12VDC |
| Watts | 1.4 Watts per module |
| Beam Angle | 145° |
| Lumens | 88 lm per module |
| Kelvin | 6,500-7,000K |
| Rating | IP65 Water-resistant |
| Operating Temp | -4° ~ 122°F |
| Max Serial Connection | 30 Modules |
| Lifetime Hours | 42,500 Hours |
| Certification | UL Recognized, CE, RoHS |
| Warranty Period | 1 Year |
| Downloads & Info |
| Click For Product Data Sheet |
| Click For Installation Guide |
| Wiring Diagrams |
 |
 |
 |
Super Nova 1 LED Module Daylight White 145°, 1.4W 12VDC
Super Nova 1 LED Module Daylight White 145°, 1.4W 12VDC
Super Nova 1 LED Module Daylight White 145°, 1.4W 12VDC
Note: * Indicates a required field
Good product on time
Used to replace landscape lighting. With added power supply changes from 24ac to 24dc. More economical than expensive original leds.
Apr 19, 2020 | Ralph
Great upgrade for brick lights
I incorrectly stated on a earlier review that I was updating 24ac to dc but should be 12vac to 12VDC. Have 5 brick lights that would have cost $100 each to replace. Instead I purchased the string of 12VDC leds and installed two in each brick lights and replaced the old transformer with a 36w waterproof power supply also from ecolocityled.com. Works good and saved a bunch of time and money as the brick lights were not serviceable and replacement leds aren't available. Thanks ecolocityled.com!!!!
Apr 20, 2020 | Ralph Polley
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
