Header Logo

RGB LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m) NEW!

SKU: LN-DX-NE-RGB-FH-5

Product Description

Our flat topped side emitting and horizontal bending RGB Neon LED Strips can be used to create smooth shadow and glare free colored lighting on walls and curved surfaces. You won't need a plastic cover or diffuser when you use these strips because they are encased in a special milky silicone molding. This product is ideal for architectural accents, signs, displays, night clubs, storefronts, interior designs, or any application where a dot free color changing light is desired. Six 3in1 LEDs per every 2.46" cuttable section produces 44 lumens per foot when all colors are on full brightness. This neon flex strip is side emitting, meaning it can only bend on a horizontal axis. Each 5 meter roll comes with 10 mounting clips, 10 self-tapping screws, 1 wire lead setup, and one end cap. You can cut this neon flex every 2.46" but you must be able to solder a wire lead to re-connect. A power draw of 4.61 watts of 24VDC power for each foot means the 16.4ft roll would need 76 watts minimum of 24VDC power and RGB color control to light on full brightness. This product is ETL listed, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
Calculate Electrical Load
Enter Length:  
* 4.61 Watts =
0.00 Watts
* Power Supply capacity must be larger than minimum lighting load.
Product Specifications
SPECIFICATIONS
ModelWaterproof Neon RGB LED Strip Light, Side Emitting - ETL 24VDC - 197" (5m)
SKULN-DX-NE-RGB-FH-5
Dimensions197" x 0.39" x 0.60"H
Connection Type4 Wire RGB(+)
LED Chip Type5050
LED Quantity6 SMDs per 2.46 inches
LEDs Per Strip480 RGB 3 in 1 SMD LEDs
Input Power24VDC Constant Voltage
Watts4.61W per foot
Beam Angle110°
Lumens44 lm/ft
RatingIP67 Waterproof
Ambient Temperature-4°~113°F
Max Serial Connection20 Feet
CertificationETL Listed, RoHS, CE
Product Lifetime50,000 Hours
Warranty Period2 Years

Aluminum Mounting Track for 10mm Side Emitting Flat & Round Top LED Neon

SKU: LN-DX-NEA-AP-17     View Product Page
This product is a 1 meter long (3.28ft) aluminum track for mounting our flat top and round top RGB and single color LED neon flex. This product is intended only for our 10mm RGB, white and warm white side emitting neon flex strips listed below. Each 3.28 foot of mounting track includes two 1" long self tapping screws. The track is designed with extra space for screw heads so there is no need to counter sink. Easily install the track by mounting and then pushing the LED neon flex strip into place. This track enables smooth and straight linear lighting, with no sags, annoying light dots or hot spots. Please note that factory wire leads, end caps, and connectors do not fit inside the track.

Aluminum Mounting Track for 10mm Side Emitting Flat & Round Top LED Neon

Silicone End Cap with Hole and 4 Wire Lead for Flat Side Emitting RGB Neon Flex

SKU: LN-DX-NSF-RGB-ECH     View Product Page
A 12" long 22AWG 4 wire solder lead with white PVC jacket and one holed end cap for re connection of RGB Side Emitting Flat Top Neon Flex Strips. The wire lead must be soldered when cutting and re-connecting our RGB side emitting flat neon flex strips. Wires are cut shorter and pre-tinned on the end intended for soldering. Silicone Adhesive is required to maintain IP67 waterproof level. All additional accessories are listed found below.

Silicone End Cap with Hole and 4 Wire Lead for Flat Side Emitting RGB Neon Flex

Silicone End Cap for Flat Side Emitting RGB Neon Flex

SKU: LN-DX-NSF-RGB-EC     View Product Page
A silicone end cap for sealing non wired ends of our RGB Side Emitting Neon Flex Strips. This end cap is intended only for the flat version of the flex strip. Silicone Adhesive is required to maintain IP67 waterproof level. All accessories can be found in products listed below.

Silicone End Cap for Flat Side Emitting RGB Neon Flex

GE Advanced High Strength Silicone Sealant - 2.8oz Clear

SKU: OA-AM-SIL-GLU     View Product Page
Use the GE Advanced high strength silicone sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights. The GE Advanced silicone will not corrode the copper connections on the circuit board of the strip. It is also 30 minute rain ready, 10 year mold free, UV and freeze resistant, shrink and crack proof.

GE Advanced High Strength Silicone Sealant - 2.8oz Clear
Out of Stock

Precision Micro Shears for Silicone Strip Housing and Small Wires

SKU: OA-AM-SIL-CUT     View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").

Precision Micro Shears for Silicone Strip Housing and Small Wires

Product Reviews

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

- There are currently no reviews for this product

FREE SHIPPING OVER $200
Orders Shipped within Continental United States * Non Oversized Items
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top