SKU: LN-DX-FV-RGBW-ECH
A 12" long 22AWG 5 wire solder lead with white PVC jacket and one holed end cap for re connection of RGBW Side Emitting Neon Flex Strips. The wire lead must be soldered when cutting and re-connecting our RGBW side emitting flat neon flex strips. Wires are cut shorter and pre-tinned on the end intended for soldering. Silicone Adhesive is required to maintain IP67 waterproof level. All additional accessories are listed found below.
Silicone End Cap for Flat Top Emitting RGBW Neon Flex
SKU: LN-DX-FV-RGBW-EC View Product Page
A silicone end cap for sealing non wired ends of our RGBW Top Emitting Neon Flex Strips. This end cap is intended only for the top emitting version of the flex strip. Silicone Adhesive is required to maintain IP67 waterproof level. All accessories can be found in products listed below.
(10) Mounting Clips and Screws for Top Emitting RGBW Neon Flex
SKU: LN-DX-FV-RGBW-CLIP-10 View Product Page
This is a pack of 10 mounting clips and self tapping screws for our RGBW neon top emitting strip lights. Each clip has a pre-drilled screw hole for mounting to walls, ceilings, bars, cabinets, stairs, overhangs, stone or concrete. The neon strip is made of a silicone so mounting tape does not bond well so mounting clips are the best mounting option.
RGBW LED Neon Waterproof Vertical Bend Top Emit - ETL 24VDC
SKU: LN-DX-NE-RGBW-FV-5M View Product Page
Use our top emitting, vertical bending, RGBW Neon Flex Strips to create smooth dot and glare free color lighting + cool white using an all in one encapsulated silicone neon flex strip. The 16x16mm silicone housing is anti yellowing, saltwater and fire reistant with an IP65 water and dust proof rating. This product is ideal for architectural accents, signs, displays, night clubs, storefronts, interior designs, or any application where a dot free color changing light is desired. Six 4in1 LEDs per every 2.81" cuttable section produces 100 lumens per foot when all colors are on full brightness. This neon flex strip is side emitting, meaning it can only bend on a horizontal axis. Each 5 meter roll comes with 10 mounting clips, 10 self-tapping screws, 1 wire lead setup, and one end cap. You can cut this neon flex every 2.81" but you must be able to solder a wire lead to re-connect. A power draw of 4.76 watts of 24VDC power for each foot means the 16.4ft roll would need 78 watts minimum of 24VDC power and RGBW color control to light on full brightness. This product is ETL listed, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
