This is a variety of great Mixed Media art work done by a local customer of ours at MyStudioX.com. He has used LED Lighting to create extraordinary effects that would not have been achieved without the versatility and brightness of LED Lights. On the different projects he has used Ribbon Star Ultra White LED Strip Lights, dimmed and powered by our RF Single Channel Remote Dimmer, on the color changing pieces he has used our ES3 RGB LED Modules with our RGB Controller w/ IR Remote in order to have control over his multiple controller locations with a single Infrared remote. In the glass egg piece he has used a G4 Barrel Type LED Bulb. As you can see his work is great without the LED Lights, but the LED Lights really bring a whole new dimension to his work.
ES3 RGB LED Module with 160° Lens - 12VDC
SKU: MD-HT-ES3-RGB View Product Page
This LED module is a great color changing backlight module for channel letters, halo lighting and sign lighting. The 160° beam angle provides a wider beam angle that enable less modules to be used with more even lighting diffusion. This product easily conforms to circular and curved layouts. A total of three 5050 SMD chips provide ample lighting with a max power requirement of 0.72W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for cove and accent lighting and for use as under-cabinet general illumination. A constant voltage DC power source is needed to power this product. The injected plastic molding ABS shell provides long lasting and durable protection from the elements with a quality PC board and 3 surface mount LEDs below. No more than 20 modules should be powered in a serial connection, 40 modules can be powered in a looped circuit. Please use parallel connections for larger lighting runs. IP66 rating is totally dust tight with protection against direct high pressure water jets (non-submersible) for both indoor and outdoor lighting applications.
G4 Wafer type LED Bulb 1W - White
SKU: LB-SC-G4W-W View Product Page
With light output comparable to a 10W halogen bulb and an estimated life span of over 50,000 hours the 1W G4 Wafer type LED Bulb is an economical, long lasting, energy saving solution for car lights, ceiling lights, lamps and any other application using 12VDC power. A 2-pin base type makes for easy installation, and the lack of any hazardous production materials makes it a safe, eco-friendly lighting solution.
LED Dimmer PWM 1 Channel RF Remote, 5-24VDC 8A
SKU: LC-LN-1DIM-WR View Product Page
This LED Light Dimmer uses a uniquely paired RF remote control to dim your LED lighting products or turn them off and on. It requires 5VDC, 12VDC, or 24VDC constant voltage input to operate, can handle 1 channel up to 8A or 96W of power using 12VDC or 192W of power using 24VDC. Wires are easily secured with spring loaded connectors. This remote controlled dimmer can be used to dim LED Modules, LED light Ribbon, LED lights, or for dimming any one color LED product with 5-24V power requirements. Remote control requires (1) 3V / CR2025 type battery, one is included. Easy access RF remote buttons allow for quick access to 25%, 50%, 75%, and 100% dimming levels as well as a delayed shut off timing function. Each LED Light Dimmer is paired for use with a unique remote so as to prevent command crossover when using multiple LED Light Dimmer units.