This DMX decoder allows for 48 Amps of LED lights to be controlled via a DMX control signal over 12 channels. Select your dimming refresh rate at 8bit (256 levels) or 16bit (65536 levels) to change the smoothness of your color fades and gradients. With two DC power inputs, one for channels 1-6 and the other for 7-12, this decoder can control 6 channels of LED lights of similar or variating voltage inputs. DMX connections are made using either XLR-3 type connections or RJ45 ethernet connections for the DMX signal input and output. There are a total of four, 3 channel, common anode outputs with screw-down terminal blocks for easy connection and control. This decoder is able to accept 12-24VDC at 4A per channel (twelve channels total) for max load of 576W/12V, or 1152W/24V. You can set the starting address of the DMX decoder via the electronic display. Please note that each DMX decoder requires 12 addresses in the DMX universe being used. A built in LED light test mode is available with this DMX decoder, CE, RoHS approved. A 12-24VDC low voltage driver is required to power this unit and must be suffice to power the load of the light output. Systems with more than two DMX decoders being used require an XLR3 or RJ45 DMX terminator on the last DMX decoder in the series.
|Model||12 Channel DMX Decoder|
|Dimensions||7.08"L x 4.80"W x 1.54"H|
|DMX Type||DMX 512|
|DC Power||12-24VDC 4A per Channel Max|
|Watts||12VDC - 576W Max|
24VDC - 1152W Max
|Dimming Levels||8 bit (256) / 16bit (65536)|
|Warranty Period||1 Year|
|Concurrent Mixed Input Voltages||Yes CH: 01-06 / 07-12|
|Test Function||Yes See Mode|
The specifications for this product have changed. Please see spec table for details.
DMX Signal Cable, RJ45 to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL1 View Product Page
This is a DMX signal Cable for an RJ45 type DMX output to an XLR3 Female type DMX input. This cord can be used to connect our U7, Stick 2+, and Stick 3 DMX controllers to any of our DMX drives with an XLR3 DMX input. This cable can also be used to connect an RJ45 output from our PX24500, PX24600, and PX403 drivers to an XLR3 DMX input. Custom cable lengths can be made for special orders, please call for pricing on custom lenghts.
DMX Signal Cable, XLR3 Male to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL6 View Product Page
This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.
STICK 3 DMX Control Panel with Software and 6VDC Power Supply - 1024 Channel
SKU: LC-NL-STICK3 View Product Page
The ETL Listed STICK3 DMX Controller is the latest and most powerful of the STICK family. Integrating a color display as well as compatibility with a variety of mobile apps and external triggering options, the STICK3 has been designed to accept the most challenging projects with ease. With 1024 DMX output channels and the ability to store 500 scenes across 10 zones, the STICK3 is one of the best value controller on the market. The newly designed touch sensitive interface features 10 buttons and a touch sensitive color wheel for fine tuning the color or speed of a scene. Built in Ethernet connectivity allows the unit to be programmed and controlled over a local network using your PC, MAC, iPhone, or Android device. Program the controller using the included USB cable and control software. You can even save images to be displayed on the screen for each scene being played. External triggering over WiFi includes RS232 for integration with an existing system, ethernet with open source protocol, infra red with easy learning using any 36Khz remote control, dry contact ports allowing you to add your own sensor or switch, and date/time including sunrise/sunset and daylight savings. This controller is compatible with any DMX fixture or DMX LED Driver. Connections include 3pin DMX, 2pin power, 2x10 pin extension socket, Ethernet socket, Power+DMX socket, and micro USB connection. Controller includes 6VDC Stand Alone power adapter, USB cable, Software Download, Micro SD Card with adapter, and wall mounting supplies.
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
Note: * Indicates a required field
- There are currently no reviews for this product