SKU: LC-SR-DMX24-FF
Our UL Recognized flicker free 24 channel adjustable DMX/RDM LED decoder has six RGBW outputs to enable smooth control of six 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal DMX decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH (24 single channels) or 24CH (6 RGBW channels) output and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 4 amps per channel allows you to control up to 1,152W (12VDC) or 2,304W (24VDC) per 24 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS and CE approved.
SPECIFICATIONS | |
Model | Flicker Free 1 or 24CH Adjustable LED DMX Decoder |
SKU | LC-SR-DMX24-FF |
Dimensions | 10.41" x 3.27" x 1.65"H |
DMX Type | DMX 512 |
RDM Control | Yes |
DC Power | 12 - 24VDC, 4A x 24CH |
Watts | 12VDC: 1,152W 24VDC: 2,304W |
Refresh Rate | 500Hz ~ 30kHz |
Resolution | 8 bit / 16bit |
Dimming Curve | 0.1 ~ 9.9 gamma |
Rating | Dry |
Operating Temp | -4°~131°F |
Certification | UL Recognized, RoHS, CE |
Warranty Period | 1 Year |
Concurrent Mixed Input Voltages | No |
Test Function | Yes See Modes |
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
Ribbon Star 50/50, 4 in 1 RGBW LED Strip Light - ETL 24VDC
SKU: RL-DX-4IN1-W-3M View Product Page
This innovative 4 color RGBW LED Strip Light combines RGB and White into a single 4 in 1 style 5050 LED Chip for brilliant color lighting and effects with the addition of a true cool white (6000-6500K) output. With ordinary RGB strip lights colors like white and warm white are nearly impossible to achieve. With the 4 in 1 RGBW strip light you can choose from colored lighting for certain events or holidays, and then switch your lighting to a cool white output when functional lighting is needed, or you can always combine the RGB and white output for over 4 billion color options. The ETL Listed RGBW LED Strip has (6) 4 in 1 RGBW 5050 LED Chips every 4 inches, making the outputs twice as dense as our standard RGBW strip. Cut this strip light every 4 inches and reconnect by soldering bare wires to the copper pads surrounding the cut points. Each 118" roll comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 51W of constant voltage 24VDC power is needed for each 118" strip (5.1W per foot). The LED Strip Light can be controlled using our 4 Channel RGBW Controllers or through 4 DMX channels in a DMX universe. For optimal light output we recommend you connect these lights no longer than 30ft in series. This strip light is ETL Listed, RoHS and CE approved.
Ribbon Star 50/50, 4 in 1 RGBWW LED Strip Light - ETL 24VDC
SKU: RL-DX-4IN1-WW-3M View Product Page
This innovative 4 color RGBWW LED Strip Light combines RGB and Warm White into a single 4 in 1 style 5050 LED Chip for brilliant color lighting and effects with the addition of a true warm white (2800-3200K) output. With ordinary RGB strip lights colors like white and warm white are nearly impossible to achieve. With the 4 in 1 RGBWW strip light you can choose from colored lighting for certain events or holidays, and then switch your lighting to a warm white output when functional lighting is needed, or you can always combine the RGB and warm white output for over 4 billion color options. The ETL Listed RGBWW LED Strip has (6) 4 in 1 RGBWW 5050 LED Chips every 4 inches, making the outputs twice as dense as our standard RGBWW strip. Cut this strip light every 4 inches and reconnect by soldering bare wires to the copper pads surrounding the cut points. Each 118" roll comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 51W of constant voltage 24VDC power is needed for each 118" strip (5.1W per foot). The LED Strip Light can be controlled using our 4 Channel RGBW Controllers or through 4 DMX channels in a DMX universe. For optimal light output we recommend you connect these lights no longer than 30ft in series. This strip light is ETL Listed, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product