Our UL Recognized flicker free 1 to 5 channel DMX LED decoder is the top choice for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (5 single channels) or 5CH output (RGBW+WW) and set your starting DMX address. XLR5, RJ45 or simple screw down connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 8 amps per channel allows you to control up to 96W (12VDC) or 192W (24VDC) per 5 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized RoHS and CE approved.
|Model||Flicker Free 1 or 5CH Adjustable LED DMX Driver|
|Dimensions||6.46" x 2.87" x 1.50"H|
|DMX Type||DMX 512|
|DC Power||12 - 24VDC, 8A x 5CH|
|Refresh Rate||500HZ ~ 30KHz|
|Resolution||8 bit / 16bit|
|Dimming Curve||0.1 ~ 9.9 gamma|
|Certification||UL Recognized, RoHS, CE|
|Warranty Period||1 Year|
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
DMX Signal Cable, XLR3 Male to XLR5 Female - 36"
SKU: LA-EL-DMX-CBL5 View Product Page
This is a DMX signal Cable with a XLR5 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX device that has XLR3 output plugs to an XLR5 input plug.
Note: * Indicates a required field
- There are currently no reviews for this product