SKU: PS-MW-60-W-12
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.
SPECIFICATIONS | |
Model | Mean Well Waterproof Transformer, 60W - 12VDC |
SKU | PS-MW-60-W-12 |
Dimensions | 6.40" x 1.67" x 1.26"H |
AC Input | 100 - 240VAC |
DC Output | 12VDC - 5A |
Output Watts | 60 Watts |
Rating | IP67 |
Operating Temp | -22° ~ 158°F |
Operating Humidity | 20 ~ 90%RH non-condensing |
Warranty Period | 1 Year |
Ribbon Star Ultra 2 White Strip Light Silicone WP CRI 90 2110 chip UL 12VDC 118"/3m
SKU: RL-SC-UT12-W-T-3M View Product Page
Our high quality CRI 90+ UL Listed Ribbon Star Ultra, White flexible waterproof LED Strip Light is enclosed in a heavy duty silicon coating for an IP65 rating, making this LED Strip water-resistant (non-submersible), dust and UV proof. Each 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 4 SMD LEDs per 0.4" and 49 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 5750-6250K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
110V Wall Plug Cord - Two Prong - 6ft.
SKU: LA-EL-CON2 View Product Page
A two prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. Approximately 6' long, 2 prong, 2 wire. Rated for 125V AC maximum. Plug is polarized for use with NEMA 1 and NEMA 5 type receptacles. The wire with several ridges on outer plastic coating is Neutral, the opposite wire is Load (Hot, Live).
Note: * Indicates a required field
- There are currently no reviews for this product