This unique little project was done using our 12 Volt DC Ribbon Star 50/50 RGB + Warm White LED Strip lights and RGB LED Spot bulbs. The color control is being operated by our T4 RGBW 8 Zone Controller Kit with two receivers, allowing the user to control the upper RGBW Strip Light section of the mantle separately from the lower RGB Spot Bulb section. The warm white output of the RGBW strip light can be controlled and dimmed separately from the color control of the RGB zones. The strip light is being housed in our KL2 type STOS ALU extrusion with clear K cover, and the RGB spot bulbs have been sunken into the mantle. Power is being driven through a 100W Mean Well Waterproof transformer. Although this project might look small it has the ability to output billions of color hues, perfect to fit any mood or special occasion.
RGB LED Spot Bulb MR16 with screw down 4 wire connect 7W
SKU: LB-AT-RGB1 View Product Page
Add some flare to your home, business, or any indoor lighting project with this RGB LED Spot Bulb. It has a projected life span of 30,000 hours and is designed to plug directly into any suitable 12VDC RGB lighting controller or pre-existing 12VDC RGB system. What is unique about this product is that in can be incorporated with other types of 12VDC RGB LED product such as RGB LED Strip Lights and RGB LED Modules. These truly are a unique RGB LED bulb due to the fact that they plug directly into any 12VDC constant voltage RGB Controller and can be daisy chained in a series with 10 bulbs maximum. To wire more than 10 bulbs to an RGB controller use parallel wire connections. Low heat, No UV, No IR. CE, ROHS Certified.
Ribbon Star 50/50, RGB + Warm White LED Strip Light - UL 12VDC
SKU: RL-SC-RS50-RGBWW-5M View Product Page
This 4 color LED Strip Light combines RGB and Warm White 5050 LED Chips into a single 16.4' roll. This UL Listed LED Strip can produce over 4 billion shades of brilliant colors using 255 levels of brightness adjustment on each color. There are 3 RGB and 3 Warm White LED Chips every 4 inches. This 16.4' (5m) LED strip can be cut every 4 inches and can be reconnected by soldering or our quick connectors to bare lead wire. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 75W of constant voltage 12VDC power is needed for this 16.4' strip (4.4W per foot). All colors of this LED Strip Light can be controlled using our 4 Channel RGB Controller or through 4 DMX channels in a DMX universe. This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting, under cabinet LED lighting, stage shows, or virtually any project that requires a full range of vivid LED color. For optimal light output we recommend you connect these lights no longer than 20ft in series. This product comes with two quick connectors to bare lead wire. See link below for demonstration video. This strip light is UL Listed, RoHS and CE approved.
STOS ALU Aluminum Extrusion - .25" with Wings
SKU: EX-KL2-2 View Product Page
$19.25
$48.99