Water-Resistant Digital RGB LED Strip Light Kit, DMX Decoder, Ribbon, PS

This water-resistant silicone sleeved digital RGB LED flexible ribbon kit with DMX to digital signal decoder is a one of a kind product! The DMX to digital decoder works by interpreting DMX512 signal and outputting each DMX RGB address to its own 4" section of 3 LEDs on our digital ribbon controlled by an 1803 type IC chip. Each 5m roll of flexible digital RGB LED ribbon has 50 1803 type IC chips allowing for roughly 17 meters of ribbon or 170 IC chips to be controlled by one DMX to digital decoder. Each kit includes one DMX to digital SPI decoder, one 5m roll of water-resistant silicone sleeved digital RGB LED ribbon, one quick-connect ribbon to bare lead wire connector and one 40W / 12VDC wall plug style constant voltage power supply with one 5.5 x 2.1mm male jack to bare lead wire connector. Additional 5m rolls of ribbon may be purchased separately (additional 40W / 12VDC constant voltage power supply included). This product is perfect for the most demanding of lighting designers; allowing for a single strip of digital ribbon to be performing several different functions across several different sections on the same strip of ribbon simultaneously! Please note that our silicone sleeved digital RGB ribbon is water-resistant only; non-submersible and non-UV proof. Each 5M roll includes 20 silicon mounting clips, two ends caps and two end caps with wire holes. Each decoder has 16 test functions with 16 levels of speed adjustment. A DMX controller (sold separately) is required to build custom lighting scenes and send a DMX signal to the included decoder.