Waterproof Mini RGB LED Signal Amplifier, 5-24VDC 4A/CH
SKU: LC-LF-8AMP View Product Page
This Mini Waterproof RGB LED Signal Amplifier is IP68 rated and can be used to extend the control signal on any outdoor or indoor LED lighting project using 5-24VDC constant voltage RGB LEDs. When you have exceeded the maximum load of your RGB LED controller use this signal amplifier to provide the same control signal to another 12A (4A x 3CH) of RGB LED strip lights, modules, or fixtures. By adding this RGB Amplifier and another power supply you can add up to 144W of RGB Lighting at 12VDC or 288W at 24VDC to your existing RGB lights. For use with 4 pin, 3 loop, common anode style RGB Lighting. Simple bare wire connections make installation a breeze on any new or existing project. The waterproof rating is not designed to be submersed, or meant to be exposed directly to outdoor elements.
Mean Well Waterproof LED Power Supply 60W - 12VDC
SKU: PS-MW-60-W-12 View Product Page
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.
Ribbon Star, Waterproof RGB 180 LED Strip Light - UL 12VDC - 118" (3m)
SKU: RL-SC-RS-RGB1-T-10 View Product Page
Fully Waterproof Flexible Ribbon Star RGB LED Ribbon has super bright 3 in 1 RGB SMD LEDs on board and can produce 16 million shades of brilliant color. The TPU coating (Thermoplastic Polyurethane) makes this LED Strip IP68 outdoor rated. Making it fully waterproof, submersible, and UV proof. There are 3 LEDs every 2 inches. This 118" (3m) roll is excellent when you need a very colorful indoor or outdoor RGB light strip. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 12VDC power needed for this 118" strip (4.3W per foot). This RBG LED light ribbon can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets. Each roll includes 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. See link below for demonstration video. This LED Strip is UL Listed for class 2 circuits, RoHS and CE approved.