Header Logo

STICK DMX Control Panel with Software and 6VDC Power Supply - 1024 Channel

Product Description


The STICK (Sunlite Touch-Sensitive Intelligent Control Keypad) is our Top-of-the-Line DMX controller solution. The unit faceplate is mounted to the wall and is compatible with most standard US and European electrical boxes. This controller features two separate DMX512 universes for a total of 1024 DMX channels. The versatility of this premium DMX controller allows it to either function via a USB to a computer connection or to run in stand alone mode with the use of an included mini SD card (with standard SD card adapter for computer) and 6VDC transformer. All these features combine to make the STICK the best choice for high-end commercial displays, night clubs, bars, restaurants, theaters, stadium, and state-of-the-art home lighting designers. STICK hardware faceplate, software CD-ROM, mini USB cable, mini SD card with adapter, and 6VDC power supply included. Software is compatible with Windows XP, Vista, and Windows 7 & 8 (32 and 64-bit versions). A built in Ethernet card allows for IP addressing of a STICK controller and also allows for the ability to be controlled via a smart phone application through the use of a networked Wi-Fi connection (Available for iPhone, Android and Windows 7 Mobile phones). Additional features included RS232 three pin capability (RX TX and GND), four additional ports (5-8), and two wire relay. Faceplates are available in either White or Black.

Product Downloads
Product Specifications
ModelSTICK DMX Controller
Dimensions6.6" x 5.0" x 0.5"H
DMX Channels1024
DMX OutputRJ45 or Screw Terminal
Ethernet CapableYes
Smartphone ControlYes
Input Voltage5VDC Micro USB
6VDC Stand Alone
Port Triggering8 (255 in binary)
Clock TriggeringYes
Operating Temp14°~122°F
RatingIP20 Dry
Warranty Period1 Year

DMX Signal Cable, RJ45 to XLR3 Female - 36"

SKU: LA-EL-DMX-CBL1     View Product Page
This is a DMX signal Cable for an RJ45 type DMX output to an XLR3 Female type DMX input. This cord can be used to connect our U7, Stick 2+, and Stick 3 DMX controllers to any of our DMX drives with an XLR3 DMX input. This cable can also be used to connect an RJ45 output from our PX24500, PX24600, and PX403 drivers to an XLR3 DMX input. Custom cable lengths can be made for special orders, please call for pricing on custom lenghts.

DMX Signal Cable, RJ45 to XLR3 Female - 36"

PX24501 RGB LED DMX Driver XLR3 & RJ45, 12-24VDC 5A/CH

SKU: LC-OL-DMX-PX01     View Product Page
This DMX512 driver allows for LED lights to be controlled via a DMX controller by accepting both DC supply voltage and your DMX controller signal and distributing it to attached LED lights. This driver accepts XLR-3 type connections or RJ45 connections for the DMX signal input and output and has a screw-down terminal block for DC input power and 4-wire common anode output to your LED lights. This driver is able to accept 6-24VDC at 5A per channel (three channels total). You can set the starting address of the DMX driver via DIP switches located on the back of the unit. Please note that each DMX driver requires 3 addresses in the DMX universe being used. One cat5 Ethernet cable included with each driver for daisy chaining multiple drivers. LED light test mode available with DMX driver. Systems with more than two DMX drivers being used require an XLR3 or RJ45 DMX terminator cable on the last DMX driver in the series.

PX24501 RGB LED DMX Driver XLR3 & RJ45, 12-24VDC  5A/CH
Orders Shipped within Continental United States
My Cart
Your Cart is currently empty.
Registered Users
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.