Our offices will be closed Monday, September 1st. All orders placed after 3:00PM PST on Friday, August 29th will be shipped the following Tuesday, September 2nd. Thank you and Happy Holidays!
FREE SHIPPING
For Orders Over $200
Orders Shipped within Continental USA

CATEGORIES

LED INFORMATION

1 Meter Aluminum Extrusion with Clear Diffuser - .5" Deep

SKU: EX-KL-1CL-1M
This product is an Aluminum Extrusion for your LED Strip Lights available in 1M lengths. This aluminum extrusion is a great housing as well as heat sink for your LED strip lights. Perfect for under cabinet, under stairs, closets, exhibits, furniture, work stations, or any project needing a thin profile for housing your LED Strip Lights. If you are looking for a finished look for your LED Strip Lights this is definitely the product for you. This product does not fully diffuse your LED Lights, individual lights can still be seen through the clear cover. Note: LED Strip Light Quick Connectors are too wide to be used with this product. Product is non water-resistant and not meant to be exposed to outdoor elements.


SPECIFICATIONS
Model Aluminum Extrusion
SKU EX-KL-1CL-1M
Dimensions 39.37"L x 0.63"W x 0.47"H
Base Dimension 0.44"W

Out of Stock
Call 775-636-6060 to
arrange a drop ship.

(Ships following business day)
20+
$0.25 off
$18.74
50+
$0.50 off
$18.49
100+
$1.00 off
$17.99
Email A Friend
Bookmark This Page Printable Page Printable Page
Printable Page
   - Click the arrow or text to reveal answers.
  - Customer service representatives.
  - Verified purchasers of this product.
For B2B or Large Quantity Price Info Click Here
Plastic End Cap with Hole for .5" Square Extrusion

SKU - EX-KL-CAP-1H     View Product Page
This product is a plastic end cap for our .5" deep square shaped LED Aluminum Extrusions to give your extrusion a clean and finished look while allowing wires to pass through the end cap. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with closed end caps if needed. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap for .5" Square Extrusion

SKU - EX-KL-CAP-1     View Product Page
This product is a plastic end cap for our .5" deep square shaped LED Aluminum Extrusions to give your extrusion a clean and finished look. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with holed end caps if needed. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap with Post for .5" Square Extrusion

SKU - EX-KL-CAP-1P     View Product Page
This product is a plastic end cap for our .5" deep square shaped LED Aluminum Extrusions with a built in electrical conducting pole in order to create custom lamps and hanging fixtures with a clean and finished look. Simply solder your positive connection to one end and your negative connection to the other. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with other end caps if needed. This product is non water-resistant and not meant to be exposed to outdoor elements.

(2) Extrusion Mounting Clips for Most Profiles

SKU - EX-KL-CLIP-2-2     View Product Page
A set of 2 clips for mounting most of our LED Aluminum Channels. Works with .5" deep square, winged and round extrusions. Comes with 2 clips for a secure mounting solution with no drilling or adhesive. Triangular Extrusions and .2" Deep Extrusions are not compatible with this product.

3M VHB Mounting Tape, 10mm x 10ft

SKU - LA-SC-MT-10-10     View Product Page
This is a double sided 3M VHB 5952 Mounting tape for mounting LED Products such as aluminum extrusions, power supplies, controllers, Strip Lights, Modules or any other product that requires an adhesive to mount. Each roll contains 10ft of 10mm wide VHB tape. Product will not stick to Silicon. Do not use to mount any item that weighs more than 5lbs. Note: This is a permanent product and may cause damage if removed.

1 Meter Aluminum Extrusion with Frosted Diffuser - .5" Deep

SKU - EX-KL-1FR-1M     View Product Page
This product is an Aluminum Extrusion for your LED Strip Lights available in 1M lengths. With its slim design this product makes for a great housing and also a great heat sink for your custom LED project. If you are looking for a finished look for your LED Strip Lights this is definitely the product for you. Perfect for under cabinet, under stairs, closets, exhibits, furniture, work stations, or any project needing a thin profile for housing your LED Strip Lights. This product is so thin that it does not fully diffuse your LED Lights, individual lights can still be seen through the frosted cover. Note: LED Strip Light Quick Connectors are too wide to be used with this product. Product is non water-resistant and not meant to be exposed to outdoor elements.

20+
$0.25 off
$18.74
50+
$0.50 off
$18.49
100+
$1.00 off
$17.99
RELATED PRODUCTS