This digital RGB LED flexible ribbon kit with DMX to digital signal decoder is a one of a kind product. This DMX to digital decoder works by interpreting a DMX512 signal and outputting each DMX RGB address to a 4" section of 3 LEDs. Each 5m roll of flexible digital RGB LED ribbon has 50 controllable 3 LED sections including a TM1803 type IC chip. This allows for roughly 17 meters of ribbon or 170 IC chips to be controlled by one DMX to digital decoder. Each decoder is sold as a kit including one DMX to digital decoder /driver, two (one male, one female) XLR3 plug ends for making your own DMX cable, one 5m roll of digital RGB LED ribbon, 12mm wide (no quick connectors for this product) and one 36W / 12VDC wall plug style constant voltage power supply with one 5.5 x 2.1mm male jack to bare lead wire connector. Additional 5m rolls of ribbon may be purchased separately (additional 36W / 12VDC constant voltage power supply included). This product is perfect for the most demanding of lighting designers; allowing for a single strip of digital ribbon to be performing several different functions among several different sections on the same strip of ribbon simultaneously! A DMX controller (sold separately) is required to send a DMX signal to the included decoder / driver.
U7 DMX Lighting Controller with Software and 5VDC Power Supply - 1024 Channel
SKU: LC-NL-DMX-U7View Product Page Our affordable 1024 Channel U7 DMX Controller comes with PC Software to easily program custom lighting scenes and control your LED Lights and DMX devices away from your computer. Save up to 250 scenes over 5 zones to the U7's 512MB mini SD card. Control up to 341 RGB fixtures or 1024 single color fixtures in stand alone mode, or when connected live to the computer control up to 512 RGB fixtures or 1536 single color fixtures. A built in Ethernet connection allows you to connect your U7 to a home or business network for network control, editing, and smartphone & tablet control. For large installations use multiple units over the network to have control over an unlimited amount of DMX channels. Clock and calender triggering functions are included for triggering of scenes at specific dates and times. The U7 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. This really is one of our most powerful and affordable DMX controllers. Software Disk, 5VDC AC/DC converter, and USB to mini USB Cable included.
Signal Terminator for DMX Driver XLR3 Type
SKU: LA-EL-DMX-TM2View Product Page This is a DMX signal terminator for DMX Decoder / Drivers that use an XLR3 type connection for DMX Signal to LED Lights. This terminator will allow you to terminate the DMX signal in the last DMX driver of your system. For use with DMX systems using more than two XLR3 DMX drivers.
(3) 12" Lead Wire to 5.5 x 2.1 Male Jack
SKU: LA-SC-WJ-12-3View Product Page This male 5.5 X 2.1mm barrel jack connector has 12" - 22AWG lead wire attached. Can be used for many projects to add a power supply connection point or mate with a female 5.5 X 2.1mm female plug connector. Sold in sets of 3. Please note this adapter is only rated for a maximum of 5A.