1 Meter Aluminum Extrusion with Frosted Diffuser - 1" Wide x 0.2" Deep
Product Description Close Description
This product is a 0.2" deep Aluminum Extrusion with a frosted cover that is wide enough to fit a double wide LED Strip Light or two 10mm wide LED Strips side by side. The thin profile design makes for sleek and modern lighting in any small space. This profile is dedicated to be mounted into ceilings and drywall but can be mounted virtually anywhere using our mounting supplies or simply by drilling and counter sinking holes through the aluminum. Keep in mind that the profile is very thin so you will be able to see dots of lights through the frosted cover. For a more diffused and even glow of light use one of our 1" deep channels instead. Note: LED Strip Light Quick Connectors can be used with this product. The certified polycarbonate cover is UV, fire rated, weathering resistant and can withstand 120C temperature/ 248F. This product is available in 2M & 3M lengths, please call 775-636-6060 to order.
(2) Extrusion Plastic Mounting Clips for KL3 1" Wide Profiles
SKU: EX-KL3-CLIP-1-2View Product Page A set of 2 clips for mounting our 1" wide LED Aluminum Channels. Use the two mounting clips to secure the aluminum channels to any drillable surface. Comes with 2 clips for a secure mounting solution that is simple to install. See a list of compatible extrusions that can be used with these mounting clips below. A minimum of two clips per 1M channel are recommended for a secure installation.
Plastic End Cap for GIZA 1" x 0.4" Extrusion
SKU: EX-KL3-CAP-2View Product Page These are our plastic end caps designed for our GIZA style 1" Wide x 0.4" deep rectangle shaped LED Aluminum Extrusions to give your extrusion a clean and finished look. The flat plastic cap will fit both the clear and frosted flat HS22 diffuser styles. The curved cap is meant to be used with the GIZA extrusion, and curved G-L cover, while the square cap is meant to be used with the GIZA extrusion and square G-K covers. These products are sold individually and in single units. With proper sealing techniques using a non conductive frost resistant silicone, these caps and channels can meet an IP67 waterproof rating for use in outdoor environments.
(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions
SKU: EX-KL-CLIP-18-2View Product Page This is a set of 2 spring loaded mounting clips for surface mounting our PDS ZM, Triada, and 1" wide extrusions to drywall, wood, granite, brick, or any other solid surface. Works with any 1" wide extrusion without wings. To use, simply drill a 5/16" - 3/8" wide hole into a surface at least 3/8" thick and push the spring through. Comes with 2 clips, one for each end of the profile. For a more secure mount multiple mounting springs may be necessary.