Our flicker free line of DMX LED drivers are the premier RGB DMX decoder for lighting professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The high PWM frequency of 7.8KHz allows for fluid dimming and color control functions, perfect for HD filming with no visible distortion. Simple screw down connectors make it easy to install your 12-24V DC input and RGB LED output, while the DMX connection is made using standard RJ45 Ethernet jacks. Each decoder has a set of 10 dip switches for setting your DMX address and also for test functions when no DMX signal is present. An impressive 6 amps per channel allows you to control up to 216W of 12VDC RGB LED lighting or 432W of 24VDC RGB LED Lighting. This product is intended only for use with 12-24VDC 4 pin, 3 loop, common anode style RGB LED and LED Lighting. DMX input and outputs require a cat5 cable with RJ45 connectors. This product is RoHS and CE approved.
|Model||Flicker Free RGB LED DMX Driver|
|Dimensions||5.0" x 1.65" x 1.30"H|
|DMX Type||DMX 512|
|DC Power||12 - 24VDC|
6A x 3CH
|Warranty Period||1 Year|
|Test Function||Yes See Modes|
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
Ribbon Star, RGB 180 LED Strip Light - UL 12VDC
SKU: RL-SC-RS-RGB1-10 View Product Page
These UL Listed Ribbon Star RGB LED strips have super bright 3 in 1 RGB SMD LEDs on board and can produce 16 million shades of brilliant color. There are 3 LEDs for every 2 inches. This 118" (3m) LED strip can be cut every 2 inches and has many quick connnection options, for easy connection and use. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 12VDC power needed for this 118" strip (4.3W per foot). This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets; Comes with two quick connectors. See link below for demonstration video. UL Listed for class 2 luminaries and fixtures, RoHS and CE approved.
Mean Well Plug-in LED Power Supply 60W - 12VDC
SKU: PS-MW-60-12 View Product Page
A high quality Mean Well brand three prong Wall plug, 60 watt Constant Voltage LED Power Supply which is suitable for dry locations and is capable of supplying power to 54 - 1 watt led modules or lights. Use with any 100-240VAC input for a quick and easy installation of your 12VDC LED Strip Lights, LED Modules, and LED Lights. Comes with short circuit, overload, over voltage and over temperature shut off protection. It has a 5.5mm X 2.1mm Female Plug for the 12V connection. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. One 5.5 X 2.1mm Male Barrel Jack with screw down terminals included. UL, RoHs and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product