Header Logo
COVID-19 UPDATE: How Ecolocity LED is responding. Learn more >

Mini Neon Top Emitting Waterproof Warm White LED Strip Light - ETL 24VDC - 197" (5m)

4 star rating


Product Description

Each 5 meter roll of well-built mini neon LED strip light has a rugged IP67 waterproof rated UV resistant PVC housing to create vibrant dot free illumination for a line of light effect. The milky coating and design of this special strip light delivers 100% light diffusion with no hot spots, similar to the look of a neon tube. This strip is designed to bend on a vertical axis and can be used to wrap perimeters, down light, up light or any application requiring the strip to be bent how it is rolled up on the reel. Use our mini neon led indoors and outdoors for a variety of lighting projects both functional and decorative. This strip requires 24 volt DC input and consumes 3.81 watts of power per foot, at full brightness. This product is dimmable by our PWM low voltage dimmers or by our magnitude dimmable power supplies with compatible wall switch. This strip can be cut and re-connected every 1.5" and comes with 1 extra wire lead setup, 1 end cap, and 20 plastic mounting clips.

Product Downloads
Click For Product Data Sheet
Click For Installation Guide
LED Strip Light Comparison Guide
Calculate Electrical Load
Enter Length:  
* 3.81 Watts =
0.00 Watts
* Power Supply capacity must be larger than minimum lighting load.
Product Specifications
ModelMini Neon Top Emitting, Waterproof Warm White
Dimensions197" x 0.52" x 0.40"H
Connection Type2 Wire (+/-)
LED Chip Type3014
LED Quantity7 SMDs per 1.5 inches
LEDs Per Strip910 SMD LEDs
Input Power24VDC Constant Voltage
Watts3.81W per foot
Beam Angle120°
Lumens160.67 lm/ft
RatingIP67 Waterproof
Operating Temp-4°~104°F
Max Serial Connection16.4 Feet (5m)
CertificationETL, RoHS, CE
Warranty Period2 Years

Solderless Connector Assembly for Top Emmiting Mini Neon

SKU: LN-SC-NEOT-CON     View Product Page
Use these 12" long solderless connectors for our top emitting mini neon strip lights if you do not want to make a connection by solder. After cutting the neon strip on the designated cut line these connectors easily slide into place to make contact on the conductive pads. Each connector includes one 12" side emitting strip light cable connector (18AWG), 1 waterproof silicon tape pad, internal install clip, external install clip, screws for end cap. The connector screws into place and requires a Phillips head screw driver for installation.

Solderless Connector Assembly for Top Emmiting Mini Neon

End Cap for Mini Neon Top Emmiting LED Strip Light

SKU: LN-SC-NEOT-CAP     View Product Page
This end cap is designed to be used only with our top emitting mini neon strip lights, SKU: LN-SC-NEOT-W-5 or LN-SC-NEOT-WW-5. After cutting your strip light use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water, dust, and moisture.

End Cap for Mini Neon Top Emmiting LED Strip Light

(10) Mounting Clips for Mini Neon Top Emmiting LED Strip Lights

SKU: LN-SC-NEOT-CLIPS-10     View Product Page
This is a pack of 10 mounting clips for our mini neon top emitting strip lights. Each clip has a screw hole with counter sink for mounting to walls, ceilings, stone or concrete. The side emitting strip bends on a vertical access so mounting tape will work but the clips offer a more versatile way to mount the strips. Sold in packs of 10, for installation on curved designs with a bend diameter no more than 5.91" to avoid damage to the strip light.

(10) Mounting Clips for Mini Neon Top Emmiting LED Strip Lights
Out of Stock

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

SKU: PS-MT-96A-24     View Product Page
Magnitude's new line of Class 2 TRIAC dimmable LED power converters use state of the art technology to provide smooth 1-100% dimming from a 120VAC source to your 24VDC LED Lights. Not only are these transformers slimmer and significantly lighter than other types of dimmable power supplies but they also use a much more common and economical TRIAC type wall mount dimmer. A slim aluminum housing with input and output wire knockouts give this Class 2 transformer a UL Listed rating that complies to UL 8750 standards. The dry and damp specifications allow this to be used indoors or in protected outdoor areas. Built in auto reset protection for short circuits, over-voltage and over-temperature give an added piece of protection for your transformer. This product is intended only for 120VAC input with a 24VDC 4A output of 96 watts. We recommend a load of 90% or less (86.4W) unless being used in a cold environment.

Magnitude LED Power Supply TRIAC Dimmable UL Listed 24VDC - 96W

2 Conductor Direct Burial Wire - 18AWG

SKU: OA-AX-2C     View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.

2 Conductor Direct Burial Wire - 18AWG

110V Wall Plug Cord Three Prong - 6ft

SKU: LA-EL-CON1     View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.

110V Wall Plug Cord Three Prong - 6ft

Product Reviews

Write a Review

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

Mounting clips are beyond useless

The quality of the light unit seems good but the clips are on another level of garbage. I could line all 10 clips beside each other and they wouldn't hold a foot of this. Zero tension hold whatsoever. Was going to buy a lot more, but without upgraded clips I don't recommend

Nov 23, 2019 | Lyndon

Dealt with issue very quickly

Ecocityled dealt with clamp issue very quickly. Fantastic new product, makes this a great product. As an electrician by trade I am always looking fir great innovative products. Many of Us at our company would love to use this product in the future. Thank you for dealing with my issues

Dec 3, 2019 | Lyndon

Orders Shipped within Continental United States * Non Oversized Items
My Cart
Your Cart is currently empty.
Registered Users
Keep my login information