LED Proximity On/Off Switch with IR Sensor, 12-24VDC 2.5A NEW!
Product Description Close Description
Our mini IR Proximity Switch is a small and effective low voltage on/off switch for 12-24VDC constant voltage LED lighting products. With a 2.5 amp output this switch can control up to 30 watts of 12VDC lighting or 60 watts of 24VDC lighting using bare wire connections. This controller is designed to be powered off when there is any object within 1" of the sensor and powered on when unobstructed. The sensor is conveniently attached to a threaded bolt designed to be permanently installed in any 0.47"-0.50" diameter hole using a 15mm size nut. Designed to be used in a dry environment, ideal applications include cabinet doors, drawers, safes, closets, tool boxes, storage, boats, RV's or any other application requiring illumination when opened or moved. For larger installations use with a single channel signal amplifier to increase the load output.
BS3 White LED Modules, 3 Samsung Chips 160°, 12VDC
SKU: MD-BW-BS3-WView Product Page This Samsung powered LED Module uses the latest technology and a special lens to create a 160° beam angle that is 40° wider than our standard LED Modules. The wider beam angle allows for more light distribution in smaller spaces with less visible hot spots when lighting signs and displays. Boasting 1.32W and 110lm per module as well as an IP65 water-resistant rating these modules are bright enough for any sign, display, task or back lighting project. The three surface mount 5630 Samsung LED Chips are mounted to an aluminum heat sink which is encapsulated in a PVC housing for a sleek and durable module design. 30 Modules maximum can be connected in one serial length, for larger jobs you must wire multiple 30 module units in parallel to the 12VDC power source. These modules have a 1 year warranty and are CE and RoHS approved.
Mean Well Plug-in LED Power Supply 40W - 12VDC
SKU: PS-MW-40-12View Product Page Our Mean Well brand 12VDC plug-in style, 40 Watt Constant Voltage LED AC/DC Power Transformer can be used in dry locations to output up to 40 Watts or 3.34 Amps of 12VDC power for 12VDC LED lights and controllers. The AC wall input is made through a common 3 prong wall plug cord and the 12VDC output uses a 5.5mm x 2.1mm female plug (5.5mm x 2.1mm male barrel jack included). Built in short-circuit, overload, and over voltage protection guards from damage do to improper installation. Use this LED power supply to connect 12VDC LED Strip Lights, LED Modules, LED Lights, RGB LED lighting and other LED Lighting products. UL listed, RoHs and CE approved.