Our UL Listed Ribbon Star Extreme is an outdoor rated LED Strip Light that can be connected in series up to 30m (100ft). With a waterproof coating Ribbon Star Extreme is IP67 outdoor rated, making it waterproof, dust and UV proof (not intended to be submersed for extended periods). Ribbon Star Extreme LED Strip Light provides a perfect light source for any outdoor or indoor lighting projects. The Strip Light can be cut every 6.5 inches and has multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 6.5 inches with a total of 126 LEDs per 3m. At .96W per foot, a 3m roll would require at least a 12W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 150W 24VDC Constant Voltage power supply. This LED strip light is perfect for any outdoor or indoor linear lighting project. Use with decks, trailers, boats, RV's, sheds, shops, landscaping, business trim, pathway lighting, or any other situation that an outdoor LED Strip Light is needed. Comes with double sided VHB mounting tape and 10 mounting clips. Requires a 24VDC Constant Voltage power source. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
|Click For Product Data Sheet|
|Extreme Outdoor Connection Guide|
|LED Strip Light Comparison Guide|
|Wire to WP Strip Soldering Video|
|Click For Electrical Load Calculator|
|Model||Ribbon Star Extreme, Blue, 118" (3m)|
|Dimensions||118"L x 0.48"W x 0.28"H|
|Connection Type||2 Wire (+/-)|
|LED Chip Type||3528|
|LED Quantity||7 SMDs per 6.5 inches|
|LEDs Per Strip||126 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||0.96W per foot|
|Max Serial Connection||100 Feet|
|Certification||UL Listed, RoHS, CE|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
|Downloads & Info|
|Click For Product Data Sheet|
|Ribbon Star Extreme Soldering Guide|
|Determining the Proper Power Supply Tutorial|
|Installing a PWM Dimmer Tutorial|
For B2B or Large Quantity Price Info Click Here
Silicone End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-EC View Product Page
This Silicone end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with silicone coating. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip.
Silicone End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECH View Product Page
This Silicone end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength RTV 4500 Silicone Sealant to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.
RTV 4500 High Strength Silicone Sealant
SKU: OA-AM-SIL-GLU View Product Page
Use the RTV 4500 high strength silicone sealant to adhere end caps and connectors to our waterproof silicone led strip lights.
Precision Micro Shears for Silicon Strip Housing and Small Wires
SKU: OA-AM-SIL-CUT View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicon housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").
(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
SKU: RA-SC-RS-T-CL-10 View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.
SILER Aluminum Extrusion for Waterproof Strips - .5" Deep
SKU: EX-KLWP-1 View Product Page
Note: * Indicates a required field
- There are currently no reviews for this product