This heavy duty waterproof RGBW LED Strip Light combines RGB and White 5050 LED Chips into a single 16.4' weatherproof roll. This UL Listed LED Strip can produce over 4 billion shades of brilliant colors using 255 levels of brightness adjustment on each color. There are 3 RGB and 3 White LED Chips every 4 inches. Each LED strip can be cut every 4 inches and can be reconnected by soldering wires to the copper pads beneath the silicon waterproof housing. Comes with 3M™ VHB mounting tape on the back, for the best long-term mounting solution. 75W of constant voltage 12VDC power is needed for this 16.4' strip (4.4W per foot). All colors of this LED Strip Light can be controlled using our 4 Channel RGB Controller or through 4 DMX channels in a DMX universe. This rugged RBGW LED Light strip is IP67 rated and can be used for indoor or outdoor applications or any wet or damp environment. For optimal light output we recommend you connect these lights no longer than 20ft in series. This product comes with two waterproof connectors to bare lead wire, 10 mounting clips and 4 end caps. This strip light is UL Listed, RoHS and CE approved. This product is not intended to be submersed for extended periods.
|Model||Ribbon Star Waterproof 50/50 RGB+W, 16.4' (5m)|
|Dimensions||16.4' x 0.65" x 0.47"H|
|Connection Type||5 Wire RGBW(+)|
|LED Chip Type||5050|
|LED Quantity||6 SMDs per 4 inches|
|LEDs Per Strip||300 SMD LEDs|
|Input Power||12VDC Constant Voltage|
|Watts||4.4W per foot|
|Max Serial Connection||20 Feet|
|Certification||UL Listed, RoHS, CE|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
Precision Micro Shears for Silicon Strip Housing and Small Wires
SKU: OA-AM-SIL-CUT View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicon housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").
RTV 4500 High Strength Silicone Sealant
SKU: OA-AM-SIL-GLU View Product Page
Use the RTV 4500 high strength silicone sealant to adhere end caps and connectors to our waterproof silicone led strip lights.
Color Wheel RGBW 8 Zone Programmable Controller and Receiver Kit, 5-24VDC 5A/CH
SKU: LC-LT-RGBW-T4-KIT View Product Page
The state of the art T4 RF remote and four color RGBW wireless receiver has the ability to control the color effects of your 5-24VDC RGB+W, RGB+WW, or any 5-24VDC 4 color constant voltage lighting product. Each color wheel RF remote is specially paired by the user to any given amount of receivers over 8 zones (optional). Advanced control technology lets the user switch from "sync" and "zone" mode for smooth color changing control using multiple wireless receivers within the 2.4GHz RF range of 100ft (line of sight). Simply change the color effects of each zone individually, in groups, or all zones as one through the T4 remote control. Choose from 10 pre-programmed modes with speed, brightness, skipping, smooth fade, and strobe options or choose from an array of colors on the color wheel with independent single color dimming control. A specialized DIY function lets the user create custom color changing scenes up to 8 colors with speed and brightness control. In zone mode you can create one custom lighting scene per zone. In sync mode you can save 8 of your favorite custom color scenes by pressing and holding the number key pad. Previous color settings are stored to the wireless receivers when power is turned on and off. Each 4 channel receiver can control up to 5 amps of 5-24VDC LEDs per channel, or 60W per channel at 12VDC (240W Max); and 120W at 24VDC (480W Max). The color wheel remote is powered through a built in 5V lithium battery and charged using an included USB to mini USB cord. One kit includes one memory RGBW T4 Color Wheel Remote and one RGBW 4 Channel Receiver, additional wireless receivers are sold separately.
Mean Well Waterproof LED Power Supply 100W - 12VDC
SKU: PS-MW-100-W-12 View Product Page
This product is a 100W Mean Well Brand, 12VDC LED transformer / power supply, 100-240VAC input, with 12VDC output. IP67 rated for wet or damp locations. Has one 10" long 12VDC output connection that can be used to power 12VDC Constant Voltage LED Modules, LED Lights, LED Light Strips, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. Comes with built in short circuit, overload, and over voltage protection. 100-240VAC input wire colors are as follow: Brown - Load, Blue - Neutral. Output wires are Black - DC negative and Red - DC Positive. This AC/DC transformer can connect up to 90 one watt led lights. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.
Mean Well Waterproof LED Power Supply 192W - 12VDC
SKU: PS-MW-240-W-12 View Product Page
This product is a Mean Well brand 192W, 12VDC LED transformer / power supply, 100-240VAC or 277VAC input, with 12VDC, 16A output, IP67 rated for wet or damp locations. Has one 10" long 12VDC output that can be used to power 12VDC Constant Voltage LED Modules, LED Lights, LED Strip Lights, RGB LED lighting and other 12VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.
Mean Well Waterproof LED Power Supply 480W - 12VDC
SKU: PS-MW-480-W-12 View Product Page
This product is a waterproof IP65 rated Mean Well brand 480W, 12VDC LED transformer designed to convert 100-240VAC or 277VAC power to 12VDC. With a 40A maximum output this transformer can drive up to 480 watts of 12VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 20 amps of current. Each Mean Well HLG-600H-12A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product