Header Logo

MICRO Aluminum Extrusion - .2" Deep

Product Description

SKU: EX-KL1-2

The slim profile of the KLUS MICRO aluminum extrusion makes it one of our most popular housings for your 8-10mm wide indoor led strip lights. With a variety of cover and finish options this channel can be used indoors and outdoors to create custom thin profiled LED lighting fixtures. Choose from non-anodized aluminum, double anodized aluminum, and double anodized black finish. This thinner channel is perfect for under cabinets, furniture, ceiling coves or any other lighting space requiring a thin profile. Change the beam angle of the LED Strip to 60° using the focus lens for a more condensed light beam or wall wash. Outdoor Covers can achieve an IP67 rating when sealed properly using a silicon adhesive and are recommended in any outdoor or UV exposed environment.

Product Downloads
Product Specifications
SPECIFICATIONS
ModelMICRO Aluminum Extrusion
SKUEX-KL1-2
Dimensions39.37"L x 0.6"W x 0.24"H
Base Width0.44"
MaterialAluminum
CoverPolycarbonate
MountingVHB Tape, Mounting Clips
Available Lengths1M, 2M
Available FinishesNon-Anodized, Anodized, Black-Anodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Non-Anodized
1M Non-Anodized
SKU: EX-KL1-2-1M

$9.49

Choose Cover Type:
Indoor
Outdoor
$9.49
1M Anodized
1M Anodized
SKU: EX-KL1-2A-1M

$11.49

Choose Cover Type:
Indoor
Outdoor
$11.49
1M Black-Anodized
1M Black-Anodized
SKU: EX-KL1-2B-1M

$12.49

Choose Cover Type:
Indoor
Outdoor
$12.49
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL1-2-2M

$23.49

Choose Cover Type:
Indoor
Outdoor
$23.49
2M Anodized
2M Anodized
SKU: EX-KL1-2A-2M

$27.99

Choose Cover Type:
Indoor
Outdoor
$27.99
2M Black-Anodized
2M Black-Anodized
SKU: EX-KL1-2B-2M

$30.49

Choose Cover Type:
Indoor
Outdoor
$30.49

(2) Extrusion Mounting Clips for Most KL1 Profiles

SKU: EX-KL1-CLIP-2-2     View Product Page
A set of 2 clips for mounting a variety of our KL1 type LED Aluminum Channels with 0.44" mounting base. Works with a number of our aluminum channels for mounting to any drillable surface. Comes with 2 clips for a secure mounting solution that is simple to install. See a list of compatible extrusions that can be used with these mounting clips below. A minimum of two clips per 1M channel are recommended for a secure installation.

(2) Extrusion Mounting Clips for Most KL1 Profiles

Plastic End Cap for MICRO .2" Rectangle Extrusion

SKU: EX-KL1-CAP-2     View Product Page
This product is a plastic end cap for our .2" deep rectangular shaped LED Aluminum Extrusions to give your extrusion a clean and finished. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with holed end caps if needed. Available in plastic finish as well as a silver plastic finish, this cap will fit both the clear and frosted diffuser styles. The faux metal silver finish does not allow for light transmittance while the plain plastic cap does show light through the plastic. This product is sold individually and in single units. With proper sealing techniques of your MICRO extrusions with HS cover these caps can achieve an IP67 water-resistant rating for use in outdoor environments.

Plastic End Cap for MICRO .2" Rectangle Extrusion
Plastic
$1.99
Silver
$2.49

Black Plastic End Cap for MICRO .2" Rectangle Extrusion

SKU: EX-KL1-CAP-2B     View Product Page
This product is a black plastic end cap for our black anodized .2" deep rectangular shaped LED Aluminum Extrusions to give your extrusion a clean and finished. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units, end caps with wire holes are not yet available in black plastic, use a small drill if you need a hole for your wiring. This product is non water-resistant and not meant to be exposed to outdoor elements.

Black Plastic End Cap for MICRO .2" Rectangle Extrusion

Plastic End Cap with Hole for MICRO .2" Rectangle Extrusion

SKU: EX-KL1-CAP-2H     View Product Page
This product is a plastic end cap for our .2" deep rectangular shaped LED Aluminum Extrusions to give your extrusion a clean and finished look while allowing wires to pass through the end cap. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with closed end caps if needed. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap with Hole for MICRO .2" Rectangle Extrusion

Plastic End Cap with Post for MICRO .2" Rectangle Extrusion

SKU: EX-KL1-CAP-2P     View Product Page
This product is a plastic end cap for our .2" deep square shaped LED Aluminum Extrusions with a built in electrical conducting pole in order to create custom lamps and hanging fixtures with a clean and finished look. Simply solder your positive connection to one end and your negative connection to the other. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with other end caps if needed. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap with Post for MICRO .2" Rectangle  Extrusion
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top