Header Logo

LARKO Aluminum Extrusion with Wings - 1" Wide x 1" Deep

Product Description

SKU: EX-KL3-5

The LARKO profile from KLUS is specially designed to be installed into pre cut grooves in drywall and other rigid walls, ceilings, coves, or surfaces. Using double wide or high density LED strip lights this channel will fully diffuse the LED light creating a solid linear light fixture with no visible dots or hot spots. The exterior wings are designed to cover up the mounting grooves for a clean, modern, and fully customizable lighting fixture. With the extrusion mounting clips this channel can easily be installed to drywall, wood, or stone and has many plastic cover options for both indoor and outdoor installations.

Product Downloads
Click For Product Data Sheet
Click for Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelLARKO Aluminum Extrusion
SKUEX-KL3-5
Dimensions39.37"L x 1.81"W x 0.98"H
Base Width0.94"
MaterialAluminum
CoverPolycarbonate
MountingScrews, Mounting Springs
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL3-5A-1M

$29.99

Choose Cover Type:
Flat
Shaped
$29.99
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL3-5A-2M

$73.49

Choose Cover Type:
Flat
Shaped
$73.49

Plastic End Cap for LARKO 1" x 1" Extrusion with Wings

SKU: EX-KL3-CAP-5     View Product Page
This product is a plastic end cap for our 1" Wide x 1" Deep square shaped LED Aluminum Extrusions with wings, to give your extrusion a clean and finished look. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap for LARKO 1" x 1" Extrusion with Wings

(2) KMA Flush Mounting Springs for 1" Extrusions with Wings

SKU: EX-KL-CLIP-20-2     View Product Page
This is a set of 2 spring loaded mounting clips for flush mounting our 1" wide with wings extrusions to drywall, wood, granite, brick, or any other solid surface with a 1.02" gap. Works with 1" wide winged extrusions only. Comes with 2 clips, one for each side of the profile. In order to secure a 1M length, a minimum of 4 clips would be necessary.

(2) KMA Flush Mounting Springs for 1" Extrusions with Wings

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top