RGB Flood Lights Color Wash The Aesthetic Medicine & Anti-Aging Clinic

Bright Star 3 in 1 RGB LED Flood Light - 45W, 24VDC

SKU: WW-LG-RGB-F1     View Product Page
Our outdoor rated color changing RGB LED Flood lights pack an impressive amount of lighting into a newly designed slim and compact fixture. Inside the housing is 15 x 3watt Epistar RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, trees, buildings, architecture, sculptures, displays and signs. With the right RGB controller(s) this fixture can output over 16,700,000 shades of vivid color and can also be incorporated with other RGB lighting products. This light is encased in an IP65 water-resistant aluminum alloy shell. Tempered glass and stainless fasteners give this light long lasting outdoor use. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. . Each fixture has one female and one male connector, power can be input from either connector or both, we recommend no more than 2 flood lights be connected in a series when powered from one end. Each fixture includes one connector to bare wire and one end cap for the other connector lead. This product is non-submersible, RoHS and CE approved.

Mean Well Waterproof LED Power Supply 240W - 24VDC

SKU: PS-MW-240-W-24     View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.

PX24500 RGB LED DMX Decoder, 12-24VDC 5A/CH

SKU: LC-OL-DMX-PX     View Product Page
The most popular DMX Decoder style PX24500, which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. 5A per channel with a maximum power of 180W / 12VDC or 360W / 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses. RGB LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.

U9 DMX Lighting Controller with Software and 5VDC Power Supply - 256 Channel

SKU: LC-NL-DMX-U9     View Product Page
The U9 256 Channel DMX Controller uses the Easy Stand Alone (PC) or Easy Stand Alone 2 (PC/MAC) computer software to build and save unique and precise lighting scenes for use away from the computer. Use with our DMX decoders to control up to 85 RGB LED fixtures or 256 single color LED fixtures. Save up to 20 different lighting scenes and play them using the shuffle buttons on the controller. 8 dry contact trigger points can be used with relays to trigger scenes or use the external HE10 connector to trigger up to 255 scenes using binary coding. This system can be run live from the computer via the included software allowing for a full DMX universe of 512 channels. 20k memory allows for 439 steps using 60 channels, and 1184 steps using 20 channels. If you are looking for a powerful and affordable DMX controller or you are just starting out learning about DMX control, this is a great controller for you. The U9 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. 5VDC AC/DC converter, and USB to mini USB Cable included.