Header Logo

Wireless DMX Transmitter and Receiver NEW!

Product Description

SKU: LC-HK-DMX-WI

This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.

Product Downloads
Product Specifications
SPECIFICATIONS
ModelWireless DMX Transmitter / Receiver
SKULC-HK-DMX-WI
Dimensions2.95"L x 5.78"W x 1.69"H
Input Connection5.5 X 2.1mm Barrel
Output ConnectionXLR 3(DMX+/-/G)
Input Power9-12VDC 300MA MIN
Output SignalDMX512
Working Frequency2.4 GHz ISM, 126 Channels
Maximum Transmitted Power20dBm
Max Control Radius1,000ft (line of sight)
RatingIndoor
Operating Temp-4° ~ 113°F
Warranty Period1 Year
Important Information

A minimum of 2 units are required to send and receive a DMX signal.

Buy
Discount
You Pay
4+
5% off
$66.50
9+
8% off
$64.40

For B2B or Large Quantity Price Info Click Here

DMX Signal Cable, XLR3 Male to XLR3 Female - 36"

SKU: LA-EL-DMX-CBL6     View Product Page
This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.

DMX Signal Cable, XLR3 Male to XLR3 Female - 36"

PX24501 RGB LED DMX Driver XLR3 & RJ45, 12-24VDC 5A/CH

SKU: LC-OL-DMX-PX01     View Product Page
This DMX512 driver allows for LED lights to be controlled via a DMX controller by accepting both DC supply voltage and your DMX controller signal and distributing it to attached LED lights. This driver accepts XLR-3 type connections or RJ45 connections for the DMX signal input and output and has a screw-down terminal block for DC input power and 4-wire common anode output to your LED lights. This driver is able to accept 6-24VDC at 5A per channel (three channels total). You can set the starting address of the DMX driver via DIP switches located on the back of the unit. Please note that each DMX driver requires 3 addresses in the DMX universe being used. One cat5 Ethernet cable included with each driver for daisy chaining multiple drivers. LED light test mode available with DMX driver. Systems with more than two DMX drivers being used require an XLR3 or RJ45 DMX terminator cable on the last DMX driver in the series.

PX24501 RGB LED DMX Driver XLR3 & RJ45, 12-24VDC  5A/CH

Flicker Free 1-5 Channel Adjustable LED DMX Decoder, 12-24VDC 8A/CH

SKU: LC-SR-DMX5-FF     View Product Page
Our adjustable flicker free 1 to 5 channel DMX LED decoder is the top choice for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display, choose from 1CH to 5CH output and set your starting DMX address. XLR5, RJ45 or simple screw down connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 8 amps per channel allows you to control up to 96W (12VDC) or 192W (24VDC) per 5 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is RoHS and CE approved.

Flicker Free 1-5 Channel Adjustable LED DMX Decoder, 12-24VDC 8A/CH

Flicker Free 1-12 Channel Adjustable LED DMX Decoder, 12-24VDC 5A/CH

SKU: LC-SR-DMX12-FF     View Product Page
Our adjustable flicker free 12 channel DMX LED decoder has three RGBW outputs to enable smooth control of three 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display, choose from 1CH to 12CH output and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 5 amps per channel allows you to control up to 720W (12VDC) or 1,440W (24VDC) per 12 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is RoHS and CE approved.

Flicker Free 1-12 Channel Adjustable LED DMX Decoder, 12-24VDC 5A/CH

Flicker Free 1-24 Channel Adjustable LED DMX Decoder, 12-24VDC 4A/CH

SKU: LC-SR-DMX24-FF     View Product Page
Our adjustable flicker free 24 channel DMX LED decoder has six RGBW outputs to enable smooth control of six 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal DMX decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display, choose from 1CH to 24CH output and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 4 amps per channel allows you to control up to 1,152W (12VDC) or 2,304W (24VDC) per 24 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is RoHS and CE approved.

Flicker Free 1-24 Channel Adjustable LED DMX Decoder, 12-24VDC 4A/CH
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top