Header Logo

LOKOM Aluminum Extrusion with Wings - 1" Wide x 1" Deep

Product Description

SKU: EX-KL3-4

The LOKOM extrusion by KLUS is specially designed to be installed in drywall, ceilings, or any pre routed grooves to create custom line of light LED strip light fixtures using double wide or high density LED strip lights. The small wings create a perfect lip to conceal the drywall mount for a more clean and professional finished look. With a double wide or high density LED strip light this fixture can be used to create linear line of light LED fixtures with little to no hot spots. Choose from a variety of flat and shaped cover options to create one of a kind, low energy lighting fixtures.

Product Downloads
Click For Product Data Sheet
Click for Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelLOKOM Aluminum Extrusion
SKUEX-KL3-4
Dimensions39.37"L x 1.18"W x 0.98"H
Base Width0.94"
MaterialAluminum
CoverPolycarbonate
MountingScrews, VHB Tape, Mounting Clips, Drywall Mount
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL3-4A-1M

$23.99

Choose Cover Type:
Flat
Shaped
$23.99
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL3-4A-2M

$58.99

Choose Cover Type:
Flat
Shaped
$58.99

TEKNIK / TEKUS Aluminum Channel for Drywall Mounting

SKU: EX-KL3-DM     View Product Page

Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M TEKNIK 1/2
1M TEKNIK 1/2" Mount
SKU: EX-KL3-DM1-1M
$27.99
1M TEKUS 5/8
1M TEKUS 5/8" Mount
SKU: EX-KL3-DM2-1M
$27.99
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M TEKNIK 1/2
2M TEKNIK 1/2" Mount
SKU: EX-KL3-DM1-2M
$65.99
2M TEKUS 5/8
2M TEKUS 5/8" Mount
SKU: EX-KL3-DM2-2M
$65.99

(6) Plastic Mounting Clips for Drywall Extrusion

SKU: EX-KL-CLIP-21-6     View Product Page
This is a set of 6 plastic mounting clips for securely adhering 1M of LED extrusion to a flush mount dry wall aluminum housing. Simply slide the plastic mounting clips into the bottom of the extrusion, 6 needed to securely fasten 1M of extrusion, and then click the extrusion into the aluminum flush mount for 0.5" drywall. See installation instructions and compatible extrusion by clicking the links below.

(6) Plastic Mounting Clips for Drywall Extrusion

Plastic End Cap for LOKOM 1" x 1" Extrusion

SKU: EX-KL3-CAP-4     View Product Page
This product is a plastic end cap for our 1" Wide x 1" Deep square shaped with small wings LED Aluminum Extrusions to give your extrusion a clean and finished look. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units. This product is non water-resistant and not meant to be exposed to outdoor elements.

Plastic End Cap for LOKOM 1" x 1" Extrusion

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top