Ribbon Star 50/50, RGB + Warm White LED Strip Light - UL 12VDC
SKU: RL-SC-RS50-RGBWW-5 View Product Page
This 4 color LED Strip Light combines RGB and Warm White 5050 LED Chips into a single 16.4' roll. This UL Listed LED Strip can produce over 4 billion shades of brilliant colors using 255 levels of brightness adjustment on each color. There are 3 RGB and 3 Warm White LED Chips every 4 inches. This 16.4' (5m) LED strip can be cut every 4 inches and can be reconnected by soldering or our quick connectors to bare lead wire. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 75W of constant voltage 12VDC power is needed for this 16.4' strip (4.4W per foot). All colors of this LED Strip Light can be controlled using our 4 Channel RGB Controller or through 4 DMX channels in a DMX universe. This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting, under cabinet LED lighting, stage shows, or virtually any project that requires a full range of vivid LED color. For optimal light output we recommend you connect these lights no longer than 20ft in series. This product comes with two quick connectors to bare lead wire. See link below for demonstration video. This strip light is UL Listed, RoHS and CE approved.
4 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
SKU: LC-LT-RGBW-WIFI View Product Page
The WiFi-104 is the latest of our Wifi LED Controllers, allowing the user to control RGB+W, RGB, two tone, and Single Color LED Strip Light all from your smart phone or tablet. With this controller you do not have to switch from your home network to get back on the internet, but it still can be used remotely as it's own WiFi source. Each WiFi-104 can control up to 12 zones separately with unlimited receivers per zone using 2.4GHz Wi-Fi, 802.11b/g/n Protocol. This means you can control any type of 5-24VDC in twelve places throughout your WiFi area. 12 built in modes including DIY functionality, color wheel choices, as well as specific 0-255 brightness settings, this controller is one of the most versatile we've seen. Output ratings of 4A x 4 channels allow this controller can handle up to 48W per channel at 12VDC or 96W per channel at 24VDC. Each additional wireless zone receiver can handle 5A x 4 channels or 60W per channel and 240W when all channels are being used, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes and pairing the wireless 12 zone receivers. This product is CE and RoHS approved.
Receiver for WiFi-104 Controller, 5-24VDC 5A/CH
This product is a wireless zone receiver that can be paired to our WiFi-104 4 in 1 LED controller for control over 12 zones. Use this receiver to control 1, 2, 3 or 4 color constant voltage LEDs with 12 individually controllable zones. With 5A x 4CH max output this receiver can control an additional 240W of constant voltage LEDs at 12VDC or 480W at 24VDC, with a 150ft RF signal radius. This product is RoHS and CE approved.
Mean Well Waterproof LED Power Supply 192W - 12VDC
SKU: PS-MW-240-W-12 View Product Page
This product is a Mean Well brand 192W, 12VDC LED transformer / power supply, 100-240VAC or 277VAC input, with 12VDC, 16A output, IP67 rated for wet or damp locations. Has one 10" long 12VDC output that can be used to power 12VDC Constant Voltage LED Modules, LED Lights, LED Strip Lights, RGB LED lighting and other 12VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.