Our 24VDC UL Listed Ribbon Star Extreme RGB LED Strip Light is the only of its kind that can be connected in series up to 30m (100ft). Using 2 positive wires (V+) and 3 negative wires (RGB) this strip can achieve longer serial connections than a standard RGB strip light. Be sure to share your positive wires to your RGB control source for the entire strip to work in unison. Forget all the extra wiring and components for your large scale color changing LED lighting projects. Ribbon Star Extreme RGB LED Strip Lights provide a perfect light source for any indoor accent, cove, stair, hallway, or pathway lighting. The Strip Light can be cut every 9.5 inches and must be soldered to re-connect. 7 SMD LEDs per 9.5 inches with a total of 84 LEDs per 3m. At 1.7W per foot, a 3m roll would require at least a 17W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 170W 24VDC Constant Voltage power supply. Comes with 3M VHB mounting tape and ten mounting clips for a permanent mounting solution. This RGB LED Strip Light requires a 24VDC Constant Voltage power source. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
|Model||Ribbon Star Extreme, Indoor RGB, 118" (3m)|
|Dimensions||118"L x 0.472"W x 0.16"H|
|Connection Type||5 Wire RGB(+/+)|
|LED Chip Type||5050|
|LED Quantity||7 SMDs per 9.5 inches|
|LEDs Per Strip||84 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||1.7W per foot|
|Max Serial Connection||100 Feet|
|Certification||UL Listed, RoHS, CE|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
Ribbon to Ribbon Solder Connector for Ribbon Star Extreme RGB
SKU: RA-SC-RSX2-RGB-C View Product Page
Use this connector with our 24VDC Indoor Ribbon Star Extreme RGB strips to solder two sections of RGB Ribbon together. This product is intended for use with our 5 wire Ribbon star Extreme RGB Strip Lights but can be modified and used as a simple solder connector for any other strip light products.
Pro RGB LED Controller with RF Remote, 5-24VDC 6A/CH
SKU: LC-OL-5RGBC-WR View Product Page
Our Pro RGB LED Controller with 28 button RF Remote has many functions including custom color selection and DIY color effects for your RGB LED lighting control. On the top of the controller is a 16 button control pad and RGB indicator lights. Input power can be 5VDC, 12VDC or 24VDC (auto switching). Max power thru this controller is 6A x 3 channels, or 90W - 5VDC, 216W - 12VDC, 432W - 24VDC. It can be used to control our Ribbon Star RGB LED strip lights, RGB LED Modules or any 5-24VDC constant voltage RGB LED Lighting. This controller is designed for use with 4 pin, 3 loop, common anode style RGB products only. RGB and input connections are screw down type. The Pro RGB offers 5 storage buttons to record your favorite effects and settings. With 16 brightness level adjustments on Red, Green and Blue you can create 4,096 possible static colors, with seven storage buttons for your favorite colors. There are 29 built in modes with speed and brightness adjustments or create your own color effects with your seven static color choices. See the link in the specification chart below for a list of the 29 pre-programmed color modes. Each RF Remote control requires (1) CR2025 type battery, one is included.
Ribbon Star Extreme, RGB Outdoor LED Strip Light - UL 24VDC - 118" (3m)
SKU: RL-SC-RSX-RGB-10 View Product Page
UL Listed Ribbon Star Extreme RGB is a fully outdoor rated, color changing, LED Strip Light that can be connected in series up to 100ft (30m). Using 2 positive wires (V+) and 3 negative wires (RGB) this strip can achieve longer serial connections than a standard RGB strip light. Be sure to share your positive wires to your RGB control source for the entire strip to work in unison. With an encapsulated waterproof coating our Ribbon Star Extreme RGB is IP67 outdoor rated, making it fully waterproof (non-submersible), dust and UV proof. Ribbon Star Extreme RGB LED Strip Light provides a perfect light source for any outdoor lighting projects. The Strip Light can be cut every 9.5 inches and has multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 9.5 inches with a total of 84 LEDs per 3m. At 1.7W per foot, a 3m roll would require at least a 17W, 24VDC power supply. At the maximum series length of 100ft (30m) this ribbon would require at least a 170W 24VDC Constant Voltage power supply. This LED strip light is perfect for any outdoor or architectural lighting project. Use with landscape features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, pools, or any other situation where a weather proof LED Strip Light is needed. Comes with 10 mounting clips for a permanent mounting solution. Requires a 24VDC Constant Voltage power source. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.